Steel Sharpening Rods

Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.

6 Item(s)

per page

  • F. Dick 10-inch Square Regular and Fine Cut Combination Steel

    Meat processors and serious cooks who hone constantly can work two cuts from one rod with this 10-inch square F. Dick steel. Two faces carry a regular cut and two carry a fine cut.The regular cut faces straighten a rolled edge and restore bite on a knife that has been working on bone and joints. The fine cut faces then smooth the edge for clean portioning. Four working faces also spread the wear across more of the rod. Accurate portions depend on a knife that stays sharp through the shift, which is what this rod is for.One rod also saves space at the station.For a smoother finish, the F. Dick 10-inch square polished and fine cut steel swaps the regular cut for polished faces. A round rod with a single regular cut is the 10-inch round steel with non-slip handle. Our honing steel guide explains when to use each cut. Learn More
  • Granton 12-Inch Multi-Cut Combination Steel

    Why Choose a 12-Inch Steel? The Professional Standard A professional rule of thumb states that a sharpening steel should be at least as long, and ideally two inches longer, than the blade of your longest knife. This makes the 12-inch Granton steel the essential choice for anyone using longer butcher knives, scimitars (typically 10-12 inches), and slicing knives. This extended length is crucial for safety and effectiveness. It allows you to draw the entire blade from heel to tip in one smooth, continuous motion, guaranteeing an evenly honed edge while keeping your guiding hand safely away from the blade. Two Steels in One: The Multi-Cut Advantage The Model 62102 rod features two opposing sides with a fine cut and two opposing sides with a super-fine (polishing) cut, delivering a complete two-stage maintenance system. 1) Fine-Cut Surfaces: These are the workhorse sides, designed for daily honing to quickly realign a blade's edge that has started to dull or roll. 2) Super-Fine (Polishing) Surfaces: After honing, a few strokes on the super-fine surfaces provide the ultimate refinement, polishing the edge to an exceptionally keen, smooth finish. Learn More
  • Granton 10-Inch Multi-Cut Combination Steel

    The Granton® 10-Inch Multi-Cut Combination Steel is a highly efficient tool for complete blade maintenance, designed for the professional or serious home cook who desires versatility and precision. Forged in Sheffield, England, this single steel effectively combines two distinct surfaces, providing the right tool for any situation—from daily edge alignment to final polishing. Fine-Cut Surfaces: These sides are the workhorse of the steel. They are designed for regular, daily honing to quickly realign a blade's edge that has begun to feel dull or has slightly rolled from use. They effectively restore a sharp cutting feel for continued work. Super-Fine (Polishing) Surfaces: After using the fine-cut side, or for blades that are already in good condition, a few strokes on the super-fine surfaces provide the ultimate refinement. These sides polish the edge, removing the most microscopic imperfections and creating an exceptionally keen, smooth finish that glides through food with minimal resistance. Learn More
  • Shun Kanso 9-inch Combination Honing Steel

    Honing gently realigns the edge of the blade, prolonging the knife’s sharpness, as Shun puts it. The 9-inch Kanso combination steel has two surfaces, a smooth one for regular honing and a micro-ribbed one for less frequent, more thorough realignment.Hold the knife at Shun’s 16° angle and draw each side lightly along the rod. Its handle is finished to match the Kanso knives, and the steel is included in the Kanso build-a-block and 6-piece sets. Ceramic rods can be brittle and may break if dropped in a commercial kitchen; this steel is rugged, and with two finishes on one tool it is more versatile than a standard smooth steel. A steel maintains an edge; it cannot restore one that has gone completely dull. A truly dull knife needs a whetstone.
    Learn to HoneOur guide to honing steels covers technique. Learn More
  • F. Dick 10-inch Square Polished and Fine Cut Combination Steel

    Four faces give this 10-inch F. Dick combination steel two finishes in one rod, with two polished sides and two fine cut sides. Butchers and meat processors who need to work efficiently can choose the edge for the job without reaching for a second steel.A polished edge is very smooth and suits cutting proteins into even portions. The fine cut sides leave a slightly rougher edge with a little bite, which helps when slicing tomatoes and other fruit and vegetables. The flat faces of the square rod also make it easy to see and hold the angle.It also suits a crowded knife roll.For more correction, the F. Dick 10-inch square regular and fine cut steel pairs a regular cut with a fine cut. A Dickoron version with sapphire and polished faces is the Dickoron Combi 12-inch square steel. A single polished rod is the Poliron 10-inch oval steel. Learn More
  • F. Dick Dickoron Combi 12-inch Square Sapphire and Polished Steel

    Two finishes on one rod give serious meat processors, butchers and fishmongers a choice of edge for the day’s work. On this 12-inch square Dickoron Combi, two opposite faces carry the sapphire cut and the other two are polished.The sapphire faces straighten the edge and give fine honing, leaving a slightly toothier edge that suits slicing fruit and vegetables. The polished faces then finish the blade after sharpening for an extremely smooth, sharp edge that portions proteins cleanly. The square profile makes each face distinct, so it is easy to tell which finish is in use.It replaces two rods at a crowded station.A single polished rod is the Dickoron Polish 12-inch oval steel, and the sapphire cut alone comes on the Dickoron Classic 12-inch oval steel. A smaller combination rod with a non-slip handle is the F. Dick 10-inch square polished and fine cut steel. Learn More

6 Item(s)

per page