You have no items in your shopping cart.
Steel Sharpening Rods
Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.
-
F. Dick Dickoron Hygienic Combi 12-inch Round Steel
Processing plants that use intensive cleaning agents and methods need a steel that stands up to them, and the Dickoron Hygienic Combi is made for that environment. One 12-inch round rod both sharpens and straightens the edge.Two sides carry a regular cut and two carry an ultra-fine cut. The regular cut faces restore bite to a knife that has gone dull on bone and joints, and the ultra-fine faces then straighten and refine the edge. Working both cuts on one rod saves carrying two steels on the belt.The round rod suits curved boning knives well.The ultra-fine cut alone is the Dickoron Micro 12-inch Oval Super Fine Cut Steel, the steel serious professionals buy most from us. A regular cut rod with a non-slip handle is the F. Dick 12-inch round steel with non-slip handle. Carry it in the F. Dick Knife Scabbard with Belt at the line. Learn More$125.45 -
F. Dick 10-inch Square Regular and Fine Cut Combination Steel
Meat processors and serious cooks who hone constantly can work two cuts from one rod with this 10-inch square F. Dick steel. Two faces carry a regular cut and two carry a fine cut.The regular cut faces straighten a rolled edge and restore bite on a knife that has been working on bone and joints. The fine cut faces then smooth the edge for clean portioning. Four working faces also spread the wear across more of the rod. Accurate portions depend on a knife that stays sharp through the shift, which is what this rod is for.One rod also saves space at the station.For a smoother finish, the F. Dick 10-inch square polished and fine cut steel swaps the regular cut for polished faces. A round rod with a single regular cut is the 10-inch round steel with non-slip handle. Our honing steel guide explains when to use each cut. Learn More$66.30 -
Granton 12-Inch Multi-Cut Combination Steel
Why Choose a 12-Inch Steel? The Professional Standard A professional rule of thumb states that a sharpening steel should be at least as long, and ideally two inches longer, than the blade of your longest knife. This makes the 12-inch Granton steel the essential choice for anyone using longer butcher knives, scimitars (typically 10-12 inches), and slicing knives. This extended length is crucial for safety and effectiveness. It allows you to draw the entire blade from heel to tip in one smooth, continuous motion, guaranteeing an evenly honed edge while keeping your guiding hand safely away from the blade. Two Steels in One: The Multi-Cut Advantage The Model 62102 rod features two opposing sides with a fine cut and two opposing sides with a super-fine (polishing) cut, delivering a complete two-stage maintenance system. 1) Fine-Cut Surfaces: These are the workhorse sides, designed for daily honing to quickly realign a blade's edge that has started to dull or roll. 2) Super-Fine (Polishing) Surfaces: After honing, a few strokes on the super-fine surfaces provide the ultimate refinement, polishing the edge to an exceptionally keen, smooth finish. Learn More$39.50 -
Granton 10-Inch Multi-Cut Combination Steel
The Granton® 10-Inch Multi-Cut Combination Steel is a highly efficient tool for complete blade maintenance, designed for the professional or serious home cook who desires versatility and precision. Forged in Sheffield, England, this single steel effectively combines two distinct surfaces, providing the right tool for any situation—from daily edge alignment to final polishing. Fine-Cut Surfaces: These sides are the workhorse of the steel. They are designed for regular, daily honing to quickly realign a blade's edge that has begun to feel dull or has slightly rolled from use. They effectively restore a sharp cutting feel for continued work. Super-Fine (Polishing) Surfaces: After using the fine-cut side, or for blades that are already in good condition, a few strokes on the super-fine surfaces provide the ultimate refinement. These sides polish the edge, removing the most microscopic imperfections and creating an exceptionally keen, smooth finish that glides through food with minimal resistance. Learn More$38.00 -
Shun 9-inch Combination Honing Steel, Steel-Grey Handle
Shun’s 9-inch combination honing steel keeps knife edges aligned with two surfaces in one rod, a smooth side for regular honing and a micro-ribbed side for more thorough realignment. A built-in angle guide sets the blade at 16°, so even a cook new to honing holds the correct angle.Its steel-grey handle suits any Shun series, which makes it the honing steel to choose for a mixed collection of Shun knives.
Classic Handle OptionThe Shun Classic Combination Honing Steel has an ebony Pakkawood handle. Learn More$59.95 -
Zwilling Bob Kramer Double-Cut Sharpening Steel
Zwilling has discontinued production of all Bob Kramer products. This was a highly rated honing rod by America’s Test Kitchen, but we offer similar, if not better, substitute rods that combine fine-cut and smooth surfaces.See the Friedr. Dick combination rods, the F. Dick 10-inch square combination steel and the F. Dick Dickoron 12-inch round combination steel, and the Victorinox combination rods, the Victorinox 10-inch combination steel and the Victorinox 12-inch combination steel. Learn More -
Victorinox 12-inch Combination Cut Honing Steel
The Victorinox 12-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.The 12-inch rod covers knives up to 10 inches, such as the Fibrox Pro 10-inch Butcher Knife, so the whole edge meets the steel on every stroke. It is made in Sheffield, England, with a plastic handle and a ring for hanging.Wipe the rod after use and hang it by its ring.For a shorter rod, see the Victorinox 10-inch Combination Steel. For a polishing surface alone, the Victorinox 10-inch Round Polish Steel. Our Honing Rod Guide explains each cut. Learn More$33.20 -
Victorinox 10-inch Combination Cut Honing Steel
The Victorinox 10-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.It is made in Sheffield, England, with a plastic handle and a ring for hanging, and the 10-inch steel fits nicely into a standard knife block. It suits knives up to 8 inches, such as the Fibrox Pro 8-inch Butcher and Fishing Knife.Wipe the rod clean after use. The polishing faces stay smooth only if they are kept free of grit, so store the steel where it will not knock against other tools.For more length, see the Victorinox 12-inch Combination Steel. Our Honing Rod Guide explains polishing steels. Learn More$32.40 -
F. Dick Dickoron Multiron 12-inch Oval Steel
The Multiron combines a fine cut and a regular cut in one oval rod. Under light pressure it hones smoothly, and with more pressure slight indentations along the rod increase the abrasion to straighten damaged or burred edges.We like this steel at Knife Merchant because you can feel any problem areas on the knife as it passes. A bad spot on the edge announces itself by touch, so the cook knows where to work, and regular use on this rod lets a knife go longer between sharpenings. The cuts are fine and even for a consistent result along the 12-inch length.For a flat rod with fine and regular cuts, the F. Dick MultiCut 11-inch flat steel takes a similar approach. A single fine cut is the EuroCut 12-inch oval fine cut steel, and a finer Dickoron finish is the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More$123.50 -
F. Dick 10-inch Square Polished and Fine Cut Combination Steel
Four faces give this 10-inch F. Dick combination steel two finishes in one rod, with two polished sides and two fine cut sides. Butchers and meat processors who need to work efficiently can choose the edge for the job without reaching for a second steel.A polished edge is very smooth and suits cutting proteins into even portions. The fine cut sides leave a slightly rougher edge with a little bite, which helps when slicing tomatoes and other fruit and vegetables. The flat faces of the square rod also make it easy to see and hold the angle.It also suits a crowded knife roll.For more correction, the F. Dick 10-inch square regular and fine cut steel pairs a regular cut with a fine cut. A Dickoron version with sapphire and polished faces is the Dickoron Combi 12-inch square steel. A single polished rod is the Poliron 10-inch oval steel. Learn More$77.35
