F. Dick Honing Steels

For the last two hundred years, F. Dick steels have been widely recognized as the best made at world fairs and other competitions. Professional butchers likely have the best understanding of steels, or honing rods. Their work demands they start with a very sharp edge and they hone their knives every ten to fifteen minutes while working. Nearly all butchers use a polished or fine cut steel because they remove a minimum amount of metal from the edge of the knife. They will only realign the existing edge, which is what a steel is designed to do.

Our recommendation is to work with a very fine stone to rebuild your edge and a fine-cut F. Dick steel to keep it straight. When you are working as a carver / butcher, honing your knife four to six times an hour, for a full shift, you will probably want to use a Friedrich Dick polished steel in order to avoid wearing the edge down. Most cooks hone the knife before starting work or after taking it to the sharpening stone. For them, the F. Dick regular cut steel works well. If you keep the knife edge aligned, you won’t have to grind a new edge as often and the knife lasts longer.

Items 41 to 42 of 42 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • F. Dick 1905 10-inch Round Regular Cut Steel

    Matching the classic look of the 1905 knife series, this 10-inch round steel keeps those knives honed with a regular cut. It suits a home cook who wants the steel in the block to match the knives beside it.The regular cut realigns an edge that has rolled with use, so the knife keeps cutting cleanly and needs abrasive sharpening less frequently. Ten inches covers 1905 knives up to the 8-inch chef’s knife, with room for a full stroke. The handle and rod join without a gap, which keeps the steel easy to clean.Hang it by the stove, or keep it in the block beside the knives it serves.Pair it with the 1905 8-inch chef’s knife or the 1905 6-piece magnetic knife block set. For longer blades, a 12-inch rod such as the EuroCut 12-inch Round Regular Cut Steel adds reach, and a wood-handled steel is the F. Dick Honorary steel. Learn More
  • F. Dick 10-inch Round Fine Cut Sharpening Steel, Red Handle

    Butchers, meat processors, fishmongers and line cooks hone constantly through a shift, and this is the kind of steel they reach for. A fine cut has a little texture, enough to bring back the edge on German and American knives under 60 Rockwell without being aggressive, so it can be used many times a day.Fine cut is the sensible default for most Western knives. It keeps a good edge on standard stainless and carbon steel blades, while a regular cut adds more texture for heavier wear and a polishing steel suits the softest stamped knives.
    Round or Oval?The F. Dick 10-inch Fine Cut Oval Steel has the same fine cut on an oval rod, which puts more of the rod against the blade on each stroke and will not roll off a counter. For soft stamped butcher knives, the F. Dick 10-inch Non-Chromium Polishing Steel is the better match. Our Honing Rod Guide explains the difference between cuts. Learn More

Items 41 to 42 of 42 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5