You have no items in your shopping cart.
F. Dick Honing Steels
For the last two hundred years, F. Dick steels have been widely recognized as the best made at world fairs and other competitions. Professional butchers likely have the best understanding of steels, or honing rods. Their work demands they start with a very sharp edge and they hone their knives every ten to fifteen minutes while working. Nearly all butchers use a polished or fine cut steel because they remove a minimum amount of metal from the edge of the knife. They will only realign the existing edge, which is what a steel is designed to do.
Our recommendation is to work with a very fine stone to rebuild your edge and a fine-cut F. Dick steel to keep it straight. When you are working as a carver / butcher, honing your knife four to six times an hour, for a full shift, you will probably want to use a Friedrich Dick polished steel in order to avoid wearing the edge down. Most cooks hone the knife before starting work or after taking it to the sharpening stone. For them, the F. Dick regular cut steel works well. If you keep the knife edge aligned, you won’t have to grind a new edge as often and the knife lasts longer.
-
F. Dick 8-inch Coarse Cut Kitchen Steel
F. Dick markets this smaller steel as a household steel, and its coarse cut renews the edge on standard German and American blades. Poultry processors who work with 5- and 6-inch boning knives use it extensively, since a short rod is all those knives need.An 8-inch rod is also a good choice for a hunter’s field kit, being small, light and easier to pack than a 10- or 12-inch steel. The coarse cut removes a little more metal than a regular cut, so a few strokes bring back a dull field knife. Follow it with a finer steel when a smoother edge is wanted.It fits a tackle box too.For a smaller steel still, the F. Dick pocket steel fits a pocket or tackle box. A regular cut kitchen steel is the F. Dick 10-inch round regular cut steel. Pair it with the MasterGrip 3-piece field dressing kit for the field. Learn More$22.10 -
F. Dick DarkNitro 12-inch Oval Sharpening Steel
DarkNitro knives are harder than most F. Dick knives, and F. Dick developed this steel to straighten and align their edges. It has a special surface for very high abrasion, which makes it suitable for hard knives in general.The oval rod gives the knife a large contact area, so honing is more effective. The handle sits comfortably and securely in the hand and matches the DarkNitro knives. For a hard Japanese knife or a DarkNitro chef’s knife, it keeps the edge working between sessions on the stones.Light, regular strokes suit a hard edge best, since pressing hard can chip it. A few passes before each cooking session keep a DarkNitro or Japanese knife cutting cleanly, and the stones need to come out less frequently.Pair it with the DarkNitro 8.25-inch chef’s knife or the DarkNitro 7-inch santoku. Another steel for hard knives is the Dickoron Titan 12-inch oval steel, which has a black acrylic handle. Learn More$222.95 -
F. Dick 10-inch Oval Diamond Sharpening Steel with Non-Slip Handle
When a regular steel no longer brings an edge back, a diamond rod will, without soaking a stone or learning to hold an angle on one. Diamond is the fastest-cutting rod there is. This F. Dick rod is 600 grit with a solid core, and that construction matters. Diamond pressed into a solid core lasts for years, while hollow rods with an epoxied coating can wear through in six months to a year of regular use.The oval profile puts more of the rod against the blade on each stroke, so it takes fewer strokes, and you can feel the bevel against the rod more clearly. Diamond also works on hard steels that a plain steel rod cannot touch. Its one drawback is a slightly rougher finish, so it is worth following with a few strokes on a ceramic rod such as the Idahone 12-inch Fine Ceramic Sharpening Rod, Black Wood Handle.
Diamond or Steel?For daily upkeep on a knife that is still sharp, a cut steel such as the F. Dick 10-inch Round Fine Cut Sharpening Steel, Red Handle is gentler and removes less metal. Keep the diamond rod for edges that have gone dull. Our Honing Rod Guide covers when each one makes sense. Learn More$66.30 -
F. Dick Dickoron Titan 12-inch Oval Coated Steel
Harder knives need a harder steel, and the Dickoron Titan is made for them. Its ultra-hard special coating is three times harder than standard sharpening steels, so it can work knives above 60 Rockwell that a standard rod would barely touch.The coating is slightly more abrasive than other steels, which helps it bring back an edge on hard Japanese knives and Damascus blades evenly. Meat processors also use it for the edge it gives for cutting through beef. For a fine finish, F. Dick recommends following it with the Dickoron Classic, and the oval face keeps the angle steady.For a cook with a mixed roll of German and Japanese knives, it handles the hardest blades in the set.Pair it with the Dickoron Classic 12-inch oval steel for that finishing step. Another rod for hard steels is the F. Dick DarkNitro 12-inch oval steel. A diamond option is the Dickoron Duo diamond and ceramic steel. Learn More$133.25
