You have no items in your shopping cart.
F. Dick Honing Steels
For the last two hundred years, F. Dick steels have been widely recognized as the best made at world fairs and other competitions. Professional butchers likely have the best understanding of steels, or honing rods. Their work demands they start with a very sharp edge and they hone their knives every ten to fifteen minutes while working. Nearly all butchers use a polished or fine cut steel because they remove a minimum amount of metal from the edge of the knife. They will only realign the existing edge, which is what a steel is designed to do.
Our recommendation is to work with a very fine stone to rebuild your edge and a fine-cut F. Dick steel to keep it straight. When you are working as a carver / butcher, honing your knife four to six times an hour, for a full shift, you will probably want to use a Friedrich Dick polished steel in order to avoid wearing the edge down. Most cooks hone the knife before starting work or after taking it to the sharpening stone. For them, the F. Dick regular cut steel works well. If you keep the knife edge aligned, you won’t have to grind a new edge as often and the knife lasts longer.
-
F. Dick Dickoron Titan 12-inch Oval Coated Steel
Harder knives need a harder steel, and the Dickoron Titan is made for them. Its ultra-hard special coating is three times harder than standard sharpening steels, so it can work knives above 60 Rockwell that a standard rod would barely touch.The coating is slightly more abrasive than other steels, which helps it bring back an edge on hard Japanese knives and Damascus blades evenly. Meat processors also use it for the edge it gives for cutting through beef. For a fine finish, F. Dick recommends following it with the Dickoron Classic, and the oval face keeps the angle steady.For a cook with a mixed roll of German and Japanese knives, it handles the hardest blades in the set.Pair it with the Dickoron Classic 12-inch oval steel for that finishing step. Another rod for hard steels is the F. Dick DarkNitro 12-inch oval steel. A diamond option is the Dickoron Duo diamond and ceramic steel. Learn More$133.25 -
F. Dick Dickoron Micro 12-inch Oval Super Fine Cut Steel
Among serious professionals, this is the F. Dick steel we sell most. If your work is breaking down whole carcasses or cutting steak portions all day, you want the finest edge a steel can give, and the Dickoron Micro’s super fine cut delivers it. F. Dick cuts the lines evenly and to the right depth, and the rod’s hard surface wears very slowly.The oval profile makes honing more forgiving, because the flatter face gives the blade a steady surface to ride on and more contact per stroke. The handle is sealed to meat industry hygiene standards, so it holds up to the cleaning a processing room demands.
Other Dickoron SteelsThe F. Dick Dickoron 12-inch Oval Polishing Steel is the smooth version for the softest knives and the final polish. For an everyday steel at a lower cost, our best-selling steel overall is the F. Dick EuroCut 12-inch Round Regular Cut Steel. Learn More$112.45 -
F. Dick Dickoron Polish 12-inch Oval Polished Steel
For extreme sharpness on knives with a very slim edge angle, F. Dick makes the Dickoron Polish. Its highly polished surface straightens the edge and polishes it without wearing the knife, which suits repetitive use through a long day.Meat processors, butchers and sushi chefs choose a polished steel over a coarser one when they want the smoothest possible edge. The Polish can follow a coarser steel to refine an edge the fine cut has roughened. The substantial Dickoron handle balances the 12-inch oval rod.A few light strokes before each service keep a thin edge standing upright, and the knife needs the stones less frequently.For a little more correction, the Dickoron Micro 12-inch Oval Super Fine Cut Steel adds an ultra-fine cut. A square rod with both sapphire and polished faces is the Dickoron Combi 12-inch square steel. A smaller polished rod with a non-slip handle is the Poliron 10-inch oval steel. Learn More$108.55 -
F. Dick Honorary 12-inch Oval Sapphire Cut Steel
The Honorary steel is the top of F. Dick’s range, a 12-inch oval rod with a handle that can be engraved. It makes a presentation piece for a retiring butcher, a culinary graduate or a chef marking a milestone.The rod carries the same fine sapphire cut as the Dickoron steels, so it hones gently and leaves a fine, even edge. It is extra hardened for less wear, and with the right care it can last a lifetime. The balance between the wood handle and the oval rod makes it comfortable for the long, steady strokes of daily honing.It is a steel to hand down to the next generation.The same sapphire cut with a plastic handle is the Dickoron Classic 12-inch oval steel. For a wood-handled steel to match a knife set, see the F. Dick DarkNitro steel with its oak handle or the F. Dick 1905 10-inch steel. Learn More$136.50 -
F. Dick Dickoron Classic 12-inch Round Sapphire Cut Steel
The sapphire cut is used only in the Dickoron family, and this 12-inch round Dickoron Classic brings it to butchers, fishmongers and meat processors who want sharper knives and better yields. F. Dick describes the result as velvety-soft honing.The sapphire cut has straight, very fine striations running from handle to tip. It produces a uniformly sharp, fine edge that can be kept sharp for a long time before the knife needs regrinding. The round profile gives precise control along curved boning and breaking knives, and the substantial handle balances the rod well.It also fits a full-size knife roll.An oval version is the Dickoron Classic 12-inch oval steel, and the 14-inch round suits long scimitars. For a still finer cut, serious professionals choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. A lighter round steel at the same length is the EuroCut 12-inch Round Regular Cut Steel. Learn More$104.00 -
F. Dick Dickoron Combi 12-inch Square Sapphire and Polished Steel
Two finishes on one rod give serious meat processors, butchers and fishmongers a choice of edge for the day’s work. On this 12-inch square Dickoron Combi, two opposite faces carry the sapphire cut and the other two are polished.The sapphire faces straighten the edge and give fine honing, leaving a slightly toothier edge that suits slicing fruit and vegetables. The polished faces then finish the blade after sharpening for an extremely smooth, sharp edge that portions proteins cleanly. The square profile makes each face distinct, so it is easy to tell which finish is in use.It replaces two rods at a crowded station.A single polished rod is the Dickoron Polish 12-inch oval steel, and the sapphire cut alone comes on the Dickoron Classic 12-inch oval steel. A smaller combination rod with a non-slip handle is the F. Dick 10-inch square polished and fine cut steel. Learn More$141.05 -
F. Dick Dickoron Classic 12-inch Oval Sapphire Cut Steel
In Germany, the Dickoron oval is one of the steels professionals prefer, and it gives an extremely sharp edge. This 12-inch Dickoron Classic combines the sapphire cut with an oval rod that makes the angle easy to hold.What separates the sapphire and fine cuts? Both are grooved to a similar depth, but the sapphire has straight, very fine striations running from handle to tip, while the fine cut runs in a wavy S pattern. The fine cut is therefore slightly more aggressive in texture than the sapphire. The oval face spreads the stroke across more of the edge for quick, even results.It suits sushi and fish work as well as butchery.A round version is the Dickoron Classic 12-inch round steel. For an ultra-fine finish, serious professionals choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. The S-pattern fine cut is available on the FineCut 12-inch oval steel. Learn More$119.60 -
F. Dick 12-inch Round Regular Cut Butcher Steel
Twelve inches is the length that lets most knives pass the rod from heel to tip in one stroke, and this round F. Dick butcher steel is a standard choice for that work. It suits butchers, line cooks and home cooks with a mix of knife lengths.A metal finger guard protects the hand and balances the rod, and the hang ring keeps it handy on a hook by the cutting table. F. Dick tapers the rod and cuts the grooves evenly, so a consistent angle is easy to repeat. The regular cut puts a working edge back on knives used for meat and vegetables.It is a sensible first steel for a cook who owns knives of several lengths.A shorter version is the 10-inch round butcher steel, and the 14-inch suits long scimitars. For an oval face, see the 12-inch oval butcher steel. The EuroCut 12-inch Round Regular Cut Steel is the same length without the metal finger guard. Learn More$50.70 -
F. Dick 12-inch Oval Regular Cut Butcher Steel
An oval face makes it easier to find and hold the honing angle, and this 12-inch F. Dick butcher steel pairs that shape with a regular cut and a metal finger guard. It suits cooks who want a more forgiving rod than a round steel.The regular cut grooves leave the edge with a little bite, which helps when slicing tomatoes and other vegetables thinly, and the edge also cuts proteins well. A couple of strokes on each side are enough to bring back a knife that has started to slide. The guard adds balance, and the hang ring keeps the steel at hand.The oval shape is also easier to learn on.A round version is the 12-inch round butcher steel. For a lighter oval rod, the EuroCut 12-inch oval regular cut steel is another choice. A smoother finish comes from an oval fine cut such as the EuroCut 12-inch oval fine cut steel. Learn More$66.30 -
F. Dick FineCut 12-inch Oval Steel with Non-Slip Handle
The FineCut surface looks different from most steels, with grooves shaped like a run of S curves rather than straight lines. It removes a burr and smooths the edge without leaving micro-serrations, so it is recommended for Japanese knives as well as German ones.At 12 inches, the rod gives long slicers and 10-inch chef’s knives a full stroke from heel to tip. The oval profile presents a wide face that makes the angle easier to hold. A rod that actually straightens the edge and holds up under heavy use is what keeps a busy kitchen cutting cleanly between sharpenings.For a cook with both German and Japanese knives, one fine cut rod can look after the whole roll.A shorter version is the FineCut 10-inch oval steel, and a round profile is the FineCut 12-inch round steel. For more bite, the 12-inch oval regular cut steel with non-slip handle has the same shape. Learn More$74.10
