Best Selling Sharpening Supplies

Anglers, hunters and campers can carry this F. Dick pocket steel for quick touch-ups away from the kitchen. The regular cut rod brings back the edge on a pocket knife or a fillet knife wherever it is needed.To store it, unscrew the rod and screw it back in reversed, inside the handle, which protects the cut and keeps it from snagging in a pocket or tackle box. The rod resists corrosion, so it can sit in a bag between trips without rusting. It is small enough to keep in a glove box as well.Before a trip, check that the rod is screwed in firmly so it cannot work loose in a pack.For a field kit with room for a longer rod, the F. Dick 8-inch coarse cut steel gives more length. At home, the F. Dick 10-inch round regular cut steel fits a knife block. A fishing knife to carry with it is the ErgoGrip 4-inch fishing knife. Learn More

The Idahone 12-inch Fine Ceramic Sharpening Rod is for cooks who maintain a full knife block, from paring knives to long slicers, and want one rod that serves all of them. A honing steel only pushes a rolled edge back into line. This high-alumina ceramic rod removes a small amount of steel, so it sharpens and polishes the edge at the same time. Its finish is comparable to a fine Japanese whetstone, which makes it a maintenance tool between full sharpenings rather than a substitute for them.
What It Does for Your Knives Long working surface: Accommodates 10-inch chef’s knives and slicers as readily as short knives, so one rod covers the whole block. Fine ceramic abrasive: Refreshes a working edge in a few light strokes and leaves a smooth, polished finish. Suited to Japanese and Western knives: Because the rod abrades the edge rather than bending it, it maintains softer German steels and the harder steels of many Japanese knives, which tend to wear or chip rather than roll. Natural maple handle with hanging ring: Provides a secure grip for steady strokes and keeps the rod within reach at the prep station.
Other Sizes and Grits The same rod is available in a shorter length as the Idahone 10-inch Fine Ceramic Sharpening Rod, Hard Rock Maple Handle, and with a black handle as the Idahone 12-inch Fine Ceramic Sharpening Rod, Black Wood Handle. When a knife no longer responds to the fine rod, the Idahone 12-inch Coarse Ceramic Sharpening Rod removes steel faster to restore the edge, and the fine rod then refines it. Learn More

This 3000-grit traditional waterstone delivers a comparatively high polish for its grit, paired with excellent cutting abrasion. This is an ideal final stone for an all-purpose blade. This 3000 grit also fits naturally into more advanced sharpening progressions: stones in the 2000-4000 grit range sit in the middle of the spectrum, following a coarser 400-1000 grit stone that shapes the edge and removes any chips, then refining that edge past the coarser scratch pattern it leaves behind. In a three- or four-stone progression, this stone serves as that middle stage, preparing the edge for a higher-grit (6000+) stone to follow for a mirror polish. In a simpler two-stone setup, though, it works just as well as the finishing stone itself, producing a keen edge with excellent cutting bite. As a traditional waterstone, it requires a short soak in water before use — it is not a splash-and-go tool. Testing shows it holds up harder and more durable than the King 3000, with better flatness retention over repeated use. Chef Feedback “We love the finish derived from this 3000 grit fine stone. It doesn’t ‘load up,’ cuts quickly, develops slurry fairly easily, and puts a finished edge on a knife that’s comparable with other brands of much higher grit. Highly recommended.” Learn More

The Hard, Durable Core of Professional Sharpening In the world of professional cutlery, finding a balance between hardness and durability is often an exercise in compromise. Masahiro defies this convention. This 1000 grit medium waterstone is specifically designed to service steels that represent an exceptional anomaly—blades that are incredibly hard and wear-resistant, yet maintain a durability that prevents brittleness. The MH40103 is the essential bridge between coarse repair and fine polishing, providing the tactile feedback required to set a perfect primary bevel. Unlike standard synthetic stones that can feel 'mushy' or wear down unevenly, this Masahiro traditional waterstone maintains its flatness longer while providing a consistent slurry. It is the workhorse stone for the high-volume kitchen. Whether you are maintaining a line of Masahiro's own proprietary steel or any high-end Japanese carbon blade, this stone handles the density of the metal without glazing over. The generous 2-7/8 inch width provides a massive landing zone for larger chef's knives and cleavers, ensuring stable, full-blade strokes that result in a uniform edge from heel to tip. Where most stones require external holders that can slip on wet stainless tables, the Masahiro Medium 1000 comes equipped with a heavy-duty, integrated stand. This isn't just a convenience; it is a safety and precision feature. By raising the stone off the work surface and providing a non-slip base, it allows for a more ergonomic sharpening angle and prevents the 'knuckle-knock' common with low-profile stones. This is the definitive tool for the chef who demands an edge that holds up through 40 pounds of prep without the fear of chipping. Learn More

- Dimensions: 9 in. x 3 in. x 3/4 in.
- Coarse grit silicon carbide stone.
- Superbly flat with hard bond.
- Promotes maximum cutting for all grit sizes of water stones.
- Provides swarf removal.
- Produces extremely flat results on all water stones, ceramic or traditional. Soak the flattener in water for at least 10 minutes prior to use. Learn More

Professional-Grade Lubrication for a Frictionless Edge Sharpening is a game of heat and friction management. Without the correct lubricant, even the highest-quality sharpening stone will eventually 'glaze'—a process where microscopic metal particles, known as swarf, become embedded in the stone's pores, rendering it useless. Norton 16 oz. Sharpening Stone Lubricant is engineered specifically to prevent this failure, ensuring your India or Crystolon stones remain aggressive and effective for years. The Science of Swarf Suspension This highly refined mineral oil is formulated with a specific viscosity that lifts metal filings off the stone’s surface during the sharpening stroke. By keeping these particles in suspension, the oil prevents them from clogging the abrasive grit. Unlike generic oils or lower-grade lubricants, this Norton formula is processed to meet strict United States Pharmacopoeia (USP) standards. This means it is entirely food-safe, a non-negotiable requirement for professional chefs, butchers, and home cooks who sharpen their tools in the same environment where they prep food. Why Professionals Choose Norton In high-volume environments like butcher shops or industrial kitchens, speed and hygiene are paramount. This oil does not cake, thicken, or turn rancid over time. It remains fluid, allowing for easy cleanup with a simple wipe. Whether you are performing a heavy repair on a coarse Crystolon stone or finishing a delicate edge on a Fine India oil stone, this lubricant provides the thermal stability needed to prevent localized heat buildup, which can temper the steel and ruin a blade’s hardness. Made in the USA, it represents the gold standard for traditional oil-stone maintenance. Learn More

MAC heartily recommends its SR-2 Togu sharpener to everyone who owns its knives, and it is the simplest way to restore a MAC edge without learning to use whetstones. The sharpener uses a ceramic wheel, which removes less steel than the carbide notches of many pull-through sharpeners.MAC suggests that most households will need to sharpen their knives about once every two months. Between sharpenings, a ceramic honing rod keeps the edge aligned. For single-bevel knives such as the MAC yanagiba, use whetstones instead. Learn More

The MultiCut has a fine surface for restoring and honing an edge with light strokes, and the edges of its grooves have a grinding effect that takes the shoulder of the edge back when a blunt knife is steeled more firmly. One flat rod handles both upkeep and correction. It is the highest-rated steel we sell.The flat face makes a consistent angle easy to meet. Fine lines align a burred edge and clear away metal flakes for a smooth cut. Keep it out of sight in a busy kitchen, or every cook on the line will want to touch up a knife on it. The handle is balanced against the heavy rod and sealed for clean environments.An oval rod with fine and regular cut is the Dickoron Multiron 12-inch oval steel. A flat fine cut alone is the F. Dick 2000 11-inch flat steel, and the Balkan flat butcher steel has an all-metal handle. Learn More

In Germany, the Dickoron oval is one of the steels professionals prefer, and it gives an extremely sharp edge. This 12-inch Dickoron Classic combines the sapphire cut with an oval rod that makes the angle easy to hold.What separates the sapphire and fine cuts? Both are grooved to a similar depth, but the sapphire has straight, very fine striations running from handle to tip, while the fine cut runs in a wavy S pattern. The fine cut is therefore slightly more aggressive in texture than the sapphire. The oval face spreads the stroke across more of the edge for quick, even results.It suits sushi and fish work as well as butchery.A round version is the Dickoron Classic 12-inch round steel. For an ultra-fine finish, serious professionals choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. The S-pattern fine cut is available on the FineCut 12-inch oval steel. Learn More