Miyabi Evolution 6.5-inch Nakiri

The Evolution nakiri has a straight 6.5-inch edge for vegetables, so the whole edge meets the board and cuts cleanly through.

It is a durable, easy-care vegetable knife for heavy prep. For an all-purpose alternative, see the Evolution rocking santoku.

Use straight up-and-down or push cuts; the flat edge cuts all the way through scallions and carrots, so slices separate cleanly. The square tip and tall blade also carry chopped vegetables to the pan.

SKU: 1019719

Availability: In stock

$164.95
  • Details

    Specifications

    • Series: Miyabi Evolution (400FC)
    • Blade length: 6.5 inches (165 mm)
    • Steel: FC61 fine carbide stainless steel, FRIODUR x2 ice-hardened
    • Hardness: 61 HRC
    • Blade: satin finish with a sandblasted katana edge
    • Edge: Honbazuke three-step hand-honed edge, 9.5 to 12 degrees per side
    • Handle: glass-fiber reinforced POM, triple-riveted, with red spacers
    • Weight: 6.4 ounces (181 g)
    • Manufacturer model: 34025-173
    • Made in: Seki, Japan
    • Item number: 1019719

    Miyabi Evolution Knives Compared

    KnifeBladeShape
    3.5-inch Paring Knife3.54 inches (90 mm)Paring
    5.25-inch Prep Knife5.12 inches (130 mm)Prep (shotoh)
    5.5-inch Utility Knife5.51 inches (140 mm)Utility
    6.5-inch Nakiri6.5 inches (165 mm)Nakiri
    7-inch Rocking Santoku7.09 inches (180 mm)Santoku
    8-inch Chef’s Knife7.87 inches (200 mm)Chef’s (gyutoh)
    9.5-inch Sujihiki9.45 inches (240 mm)Slicer
    9-inch Bread Knife9.06 inches (230 mm)Bread

    Choosing a Miyabi Line

    LineSteelWho it suits
    Miyabi BirchwoodSG2 powder steel, 63 HRCTop performance with a natural birch handle; holds its edge best through acidic vegetable prep
    Miyabi BlackMC66 powder steel, 66 HRCTop performance with a black maple burl handle; holds its edge longest on proteins and low-acid foods
    Miyabi ArtisanSG2 powder steel, 63 HRCThe same class of powder steel, for cooks who care less about the look
    Miyabi KaizenVG10, 60 HRCDamascus looks at a more moderate price; holds an edge well but needs careful use to prevent chipping
    Miyabi KohFC61, 61 HRCA durable workhorse that responds well to honing; a good first Japanese knife
    Miyabi EvolutionFC61, 61 HRCA durable workhorse with a riveted Western-style handle; easy to care for

    Keeping the Edge

    FC61 responds well to honing. A few light strokes on a ceramic or tungsten rod between uses keep the edge aligned; sharpen on whetstones at the factory angle when honing no longer restores it. Do not use a pull-through sharpener with coarse carbide.


    Care

    • Wash by hand with warm, soapy water and dry at once. Do not put Miyabi knives in a dishwasher.
    • Cut on wood or soft composite boards; glass, stone and ceramic boards damage a hard edge.
    • Store in a block, on a magnetic strip or in an edge guard, not loose in a drawer.

    Additional Info

    Blade Length (Inches) 6.5 in.
    Blade Length (mm) 165 mm
    Blade Width (inches) 0.91
    Grind 50/50 Bevel
    Steel Type FC61
    Rockwell Hardness 61
    Stainless Yes
    Handle Material POM
    Spine Thickness (mm) No
    Brand Miyabi
    Country of Manufacture Japan
    SKU 1019719
    Manufacturer's Part Number 34025-173
    Manufacturer's Suggested Retail Price $206.00

    Write Your Own Review

    You're reviewing: Miyabi Evolution 6.5-inch Nakiri