Yanagi / Sujihiki

One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.

Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.

7 Item(s)

per page

  • Minonokuni Ume 11.8-inch (300mm) Yanagiba

    The 300mm Ume yanagiba is a long sushi counter knife in the most forgiving steel Minonokuni offers. Its length slices large blocks of fish in one stroke, and it holds its edge through a long session of slicing.A blade this long gives the cook fine control over the thickness and angle of each slice, which matters for thin cuts of white fish and for presentation. It needs space, though, and a cook stepping up from a shorter yanagiba should expect to practice keeping the tip steady.
    Why a Forgiving Steel at This LengthA long single bevel takes time to sharpen evenly from heel to tip. Ume’s steel is the easiest of our three standard lines to sharpen and the least likely to chip, so a cook still learning to maintain a long edge will find it more tolerant. When the time comes for a harder edge, the Take 300mm yanagiba and Matsu 300mm yanagi use white and blue steel.For a shorter knife, see the Ume 270mm yanagiba. The knife shapes guide explains the yanagiba. Learn More
  • Minonokuni Ume 10.6-inch (270mm) Left-Handed Yanagi

    This 270mm yanagi is ground as a true left-handed knife, with the bevel forged and finished on the left side of the blade. A left-handed sushi cook gets the straight, flat slice the shape is designed for, without fighting a blade that steers the wrong way.The 270mm length handles wide blocks of tuna and full salmon fillets in a single stroke. It needs a deeper board than the shorter sizes and a little practice to control the tip, but it rewards a smooth, unhurried draw with clean slices.
    Left-Handed and LearningUme is the most forgiving of our three standard lines and the best one on which to learn to sharpen. A left-handed cook who is moving to a longer knife while still developing technique will find the softer carbon steel more tolerant. We keep this knife in stock. The Take 270mm left-handed yanagi is the white steel option for a harder edge.The Ume 240mm left-handed yanagi is shorter. The right-handed model is the Ume 270mm yanagiba. See the knife shapes guide for more on slicers. Learn More
  • Minonokuni Ume 10.6-inch (270mm) Yanagiba

    A 270mm yanagiba gives a long, even stroke for slicing wide blocks of fish, and the Ume line puts that length in a steel that forgives errors and sharpens easily. It suits a cook moving into restaurant sushi work who wants a longer knife before investing in a harder steel.The long blade has enough weight to glide through the fish while the thin edge makes the cut. Draw it toward you with a relaxed grip and let the length do the work. Pushing down or sawing crushes the fish and dulls the surface of the slice.
    Moving Up in LengthThe extra length over the Ume 240mm yanagiba takes practice to control, especially at the tip. A forgiving steel makes that practice less costly, which is why we suggest Ume for a cook building skills. For the same length in harder steel, see the Take 270mm yanagiba.The Ume 300mm yanagiba is the longest in the line. Left-handed cooks can order the Ume 270mm left-handed yanagi. The shapes guide describes how the yanagiba is used. Learn More
  • Minonokuni Ume 9.4-inch (240mm) Left-Handed Yanagi

    Slicing sashimi left-handed with a standard yanagi does not work, because the bevel is on the wrong side. The Ume 240mm left-handed yanagi is ground the other way, so a left-handed cook can make the clean, single-stroke slices the knife is made for.At 240mm, the blade suits both a home kitchen and a restaurant station. It slices salmon and tuna, and it can cut thin carpaccio of beef. The long blade lets the cut finish in one pull, which leaves the fish with a smooth, bright surface.
    The Forgiving LineUme uses the softest steel in our three standard lines. It chips less readily and is the best line for learning to sharpen. For a left-handed cook new to single-bevel knives, those qualities make the learning curve gentler. We stock left-handed Ume knives.The Take 240mm left-handed yanagi is the harder alternative in white steel. For a home board, the Ume 210mm left-handed yanagi is shorter. Read about the shape in the knife shapes guide. Learn More
  • Minonokuni Ume 9.4-inch (240mm) Yanagiba

    The 240mm yanagiba is the length to learn on for a cook who expects to slice sushi in a restaurant as well as at home. The long, narrow blade cuts a saku of tuna in one draw, and the Ume line makes it the most forgiving way to build the technique.Each slice should come from a single, smooth pull from heel to tip. The length of this knife gives enough blade to finish the cut on most fillets, so the cook does not need to saw back and forth. Keep the pressure light and let the edge do the cutting.
    The Ume ChoiceWe describe the three standard lines by who they suit rather than by rank. Ume is the right choice for a novice, being the most forgiving and the best line to learn sharpening on. The Take 240mm yanagiba is the sweet spot for cooks ready for a harder edge, and the Matsu 240mm yanagiba is for experienced hands.Other Ume lengths are the 210mm and 270mm. Left-handed cooks should see the Ume 240mm left-handed yanagi. The knife shapes guide covers slicers. Learn More
  • Minonokuni Ume 8.3-inch (210mm) Left-Handed Yanagi

    Left-handed home cooks who want to slice sushi and sashimi properly need a yanagi ground for the left hand. This Ume 210mm yanagi has its bevel on the left face, so the knife draws straight through the fish and the slice falls away cleanly.The 210mm length is manageable on a home cutting board and long enough to slice salmon, tuna or yellowtail fillets in one stroke without tearing. The narrow blade reduces drag through the flesh, and the flat back keeps the slice from sticking.
    A Left-Handed First YanagiThe Ume line is the most forgiving of our three standard lines and the easiest to learn to sharpen. That suits a left-handed cook buying a first single-bevel knife, who will be learning both the slicing stroke and the stone at once. We keep left-handed Ume knives in stock. When a harder edge is wanted, the Take 210mm left-handed yanagi is the next step.The right-handed version is the Ume 210mm yanagiba. For a longer stroke, see the Ume 240mm left-handed yanagi. For background on the shape, read the kitchen knife shapes guide. Learn More
  • Minonokuni Ume 8.3-inch (210mm) Yanagiba

    A home cook who wants to try making sushi and sashimi should start with a 210mm yanagiba, and the Ume version is the forgiving way in. The length is easy to control on a home board and still slices a salmon or tuna fillet in one stroke.The yanagiba works by drawing, not pushing. Start the cut at the heel and pull the blade toward you through the fish, using its full length. The single bevel and hollow back let the slice come away cleanly, and the result has a smooth, bright face that a sawing cut cannot match.
    Starting with UmeUme is the most forgiving of the three standard Minonokuni lines and the best for learning to sharpen a single bevel, which every yanagiba owner has to do. Its edge is less likely to chip than the harder steels in the Take 210mm yanagiba and Matsu 210mm yanagiba, which suit cooks with more experience.A longer stroke comes with the Ume 240mm yanagiba. Left-handed cooks should see the Ume 210mm left-handed yanagi. Our knife shapes guide covers the yanagiba. Learn More

7 Item(s)

per page