You have no items in your shopping cart.
Dexter Traditional Knives
Dating back to the 1800s, Dexter’s Traditional line has been trusted and adored for generations. Dexter Traditional includes Knives, Bench Scrapers, Forks and many other products. The common thread is that they feature natural wood handles affixed with brass compression rivets and made in the USA.
-
Dexter Traditional 5-inch Fishing Knife and Leather Sheath
Dexter-Russell Traditional 5-inch Fishing Knife and Leather Sheath This set pairs the Dexter-Russell Traditional 5-inch Fishing Knife with a Dexter-Russell leather sheath, giving anglers a compact working knife that rides safely on the belt or in a tackle bag. The knife follows the Russell Green River hunt and fish pattern and is built for the tasks that fall between casting and cooking: cutting bait and line, bleeding a catch and cleaning panfish and trout. The sheath protects the edge between uses and keeps the point covered in a crowded boat or bag. The Knife High-carbon stainless steel blade: Dexter-Russell now makes its Traditional knives in high-carbon stainless steel rather than plain carbon steel. The blade takes a keen edge and is easy to restore on a stone or honing steel, and it resists rust considerably better than the carbon steel used in earlier versions of this knife. It is not rust-proof, however; the care notes in the Details tab explain how to protect it. Stiff blade: The blade does not flex, so it provides the leverage needed to cut heavy line and thick bait, bleed larger fish and handle general utility work where a flexible blade would bend. Pointed tip: The fine point pierces skin cleanly to start a cut, opens the belly of panfish and trout, and reaches into tight spaces. Traditional wood handle: The classic Green River handle profile gives a secure, familiar grip during rough work on deck or at the cleaning station. The Sheath Heavy-duty leather: The leather resists punctures from the point and shields the edge from contact with tackle, tools and hard surfaces, so the knife needs sharpening less often. Open-top, friction-fit design: The knife slides in and out in one motion and is held in place by the snug fit of the leather, with no snap or strap to work with wet hands. Choosing the Right Fishing Knife The short, stiff blade suits utility work and smaller fish. To fillet larger fish, choose a longer, flexible blade from our fillet knives. Each item is also sold on its own: the Dexter Traditional 5-inch Fishing Knife and the Dexter-Russell Leather Knife Sheath. Learn More -
Dexter-Russell Traditional 4.25-inch Produce Knife, Carbon Steel
Dexter-Russell’s F5S is a compact Traditional produce knife, a size suited to trimming lettuce, cutting fruit and opening bagged produce at a market stand or in a home kitchen. Shoppers search for it by its item number, 9060. The blade takes a keen edge quickly and darkens with use, so it should be dried after washing. Beyond the kitchen, customers buy it for trimming insulation and gaskets and for opening boxes.
Other Dexter Produce KnivesThe Traditional 6-inch Produce Knife adds length for melons and cabbage, and the Sani-Safe 5-inch Produce Knife has a stain-free blade and sanitary handle. Learn More$15.45 -
Dexter-Russell Traditional 5-inch Fish Knife, Carbon Steel
Dexter-Russell has sold this pattern for generations, and its Dexter Outdoors line still calls it the Green River Traditional 5-inch fish knife. It is a short, stout working knife for the boat and the dock. It cuts bait and line, bleeds a catch, guts panfish and trout, and cleans small fish at the end of the day.The 5-inch blade is carbon steel, which Dexter describes as its classic high-carbon blade, individually ground and honed. Carbon steel takes a keen edge and sharpens quickly on a pocket stone, the reason many anglers still prefer it to stainless. It will rust if left wet with salt water and develops a dark patina with use. The model 4215 is a common search on our site, and these Traditional knives are especially popular with fishermen in the Northeast.
Fish Knife or Fillet Knife?Anglers who carry a knife on the belt or in a tackle bag can buy this same knife with a leather sheath as the Dexter Traditional 5-inch Fishing Knife and Sheath. For filleting larger fish, choose a longer, flexible blade such as the Sani-Safe 7-inch Narrow Flexible Fillet Knife. Learn More$24.25 -
Dexter-Russell Traditional 5.25-inch Sheep Skinning Knife, Carbon Steel
Sheep and lamb hides are thin and cling tightly to the carcass, so skinning them takes a short blade with a pronounced curve that can be worked in close. This Dexter-Russell Traditional sheep skinner has a 5.25-inch curved, rigid blade for exactly that, and Dexter recommends it for skinning fish, pigs, chickens and other wild game and farm animals as well.The carbon steel blade sharpens quickly in the field and takes a very fine edge. It draws more search visits than any other Dexter knife on our site, from farmers and hunters who process their own lambs, and it has a long history with customers in the Northeast.Carbon steel will rust if it is put away wet, so it needs a quick wipe and a light coat of oil after the work is done.
Choosing a Skinning KnifeFor deer and cattle, the wider, stain-free Sani-Safe 6-inch Skinning Knife covers more hide per stroke. A leather Dexter-Russell Skinning Knife Sheath is sold separately. Learn More$20.25 -
Dexter-Russell Traditional 6-inch Wide Boning Knife, Carbon Steel
The 1376 is one of Dexter-Russell’s longest-running patterns, a 6-inch wide boning knife with a carbon steel blade and a wood handle held by brass rivets. Its broad blade gives leverage and stability when boning out pork shoulders, beef and venison, and it is tall enough to keep the knuckles clear of the board.Dexter-Russell says the high-carbon blade takes a keen, long-lasting edge that is easy to sharpen, which is the main reason butchers and hunters still choose carbon. A few strokes on a steel bring it back during a long day of processing. Carbon steel does require more attention than stainless and will darken with use. These Traditional knives have a long following in the Northeast, close to the Southbridge, Massachusetts factory where Dexter-Russell has worked since its founding.
Other Traditional Boning KnivesThe same wide pattern comes in a 7-inch (1377) and an 8-inch (1378) length for larger animals. For tighter work around joints, the Traditional 6-inch Narrow Boning Knife (1376N) has a slimmer blade. Learn More$25.95 -
Dexter-Russell Traditional 6-inch Narrow Boning Knife, Carbon Steel
A thin, narrow blade reaches into places a wide boner cannot, such as the socket of a chicken thigh or the seam between muscles in a pork leg. Dexter-Russell describes this 6-inch Traditional knife as easy to maneuver around bones or under fat, and its carbon steel holds the fine edge that kind of work needs.Dexter lists it as NSF approved, unusual for a wood-handled knife, which makes it acceptable in many commercial kitchens as well as at home. The carbon steel sharpens quickly on a steel or stone. Expect the blade to darken over time, and dry it after each use to keep rust away. Knives in this Traditional pattern have sold steadily for decades, especially among customers in New England and the rest of the Northeast.
Narrow, Wide or Stiff?The Traditional 6-inch Wide Boning Knife (1376) gives more blade for larger cuts, and the Traditional 6-inch Stiff Boning Knife (2315-6) resists flexing. For a stain-free narrow blade, see the Sani-Safe 6-inch Narrow Boning Knife. Learn More$24.30 -
Dexter-Russell Traditional 6-inch Flexible Boning Knife, Carbon Steel
When the job is trimming a ham, skinning a chicken breast or following the curve of a rib cage, a flexible blade keeps more meat where it belongs. This 6-inch Traditional boning knife combines that flex with carbon steel and a wood handle, the classic Dexter-Russell build that has come out of Southbridge, Massachusetts for generations.Carbon steel takes a very sharp edge and is quick to touch up, which is why butchers and home processors who learned on it keep buying it. It does need care, since it will rust if left wet and gradually turns gray with use. These Traditional knives are especially popular with our customers in the Northeast.
Flexible or Firm?For more backbone on beef and pork, the Traditional 6-inch Stiff Boning Knife (2315-6) or the Traditional 6-inch Narrow Boning Knife (1376N) will flex less. A stain-free flexible option is the Sani-Safe 6-inch Flexible Boning Knife. Learn More$26.40 -
Dexter-Russell Traditional 6-inch Produce Knife, Carbon Steel
Dexter-Russell’s Traditional 6-inch produce knife is the most visited produce knife among the Dexter pages on our site. It is a long, slim knife with a blunt end, and Dexter calls it ideal for slicing and dicing foods like onions and tomatoes. The rounded end keeps a sharp point away from the hand during fast cutting, which suits a market stand or a home cook working through a garden harvest. Grocery chains use it to trim produce, and growers use it at harvest for crops such as celery.The blade is the old-fashioned kind that takes a very fine edge and darkens with use. Dry it after washing and give it a few strokes on a honing steel, and it will stay sharp through a season of canning tomatoes and putting up peppers. Dexter has made knives in Southbridge, Massachusetts, since 1818, and its Traditional patterns are especially popular in the Northeast.
Carbon or Stain-Free Produce Knife?For a stain-free blade and a sanitary handle, see the Sani-Safe 6-inch Produce Knife. The Traditional 4.25-inch Produce Knife is a smaller option with the same kind of blade. Learn More$16.00 -
Dexter-Russell Traditional 6-inch Stiff Boning Knife, Carbon Steel
Stiff boning knives are for pressure. Separating a beef shank, splitting cartilage at a pork joint or popping a hip socket all need a blade that will not bow under the push. This 6-inch Traditional knife from Dexter-Russell has a stiff carbon steel blade for that kind of heavy boning.Because it does not flex, it is less suited to fine trimming under skin or fat, but it holds a straight line through dense tissue. Carbon steel takes an acute edge, resharpens easily and keeps that edge with regular strokes on a smooth honing rod. It will rust if left wet, so dry it after each use. The pattern is a favorite with deer hunters and small butcher shops, and Dexter’s Traditional line has an especially loyal following in the Northeast.
Stiff or Flexible?For close trimming, the Traditional 6-inch Flexible Boning Knife (1376HB) bends with the meat. A wider stiff-feeling blade is the Traditional 6-inch Wide Boning Knife (1376). Learn More$24.95
