You have no items in your shopping cart.
Knives
-
Masahiro MV 9.5 in. Left Handed Sujihiki
The Masahiro MV 9.5 in. (240mm) Left Handed Sujihiki is the western version of the Yanagi, this is a protein knife and is intended for cleanly removing meat from bone. This is a honyaki Sujihiki meaning it is a thicker and tougher blade then many other Japanese slicers and can be used to cut beef, pork and chicken along with fish. The MV steel used in this knife can take quite a beating before dulling and the tough steel can make contact with bone; many Japanese Sujihiki(Slicers) use too delicate(hard) of steel to cut anything but fish so this knife has a huge advantage over its competition. The cook will find this knife is very easy to hone and sharpen when it finally starts to dull as the majority of the sharpening will be done on the face side of the blade and the steel is very responsive to ceramic rods and whetstones. Since Masahiro’s founding, they have been dedicated to making knives in Seki City, the sword capital of Japan. The materials used in their knives are sourced in Japan. In addition, no part of the processing is outsourced overseas, and their parts are made in Japan. At Masahiro craftsmen carry out almost all processes from material selection to hardening and finishing sharpening at their main factory. Each and every knife is packed with the know-how of our veteran craftsmen. The sharpness of our knives is guaranteed by the handiwork of craftsmen who have been making knives for many years. They carefully assess the characteristics of each material and apply the optimal processing and sharpening to each knife. The MV line by Masahiro is the model that sets the standard for stainless steel professional knives.The handle is made of laminated reinforced wood with antibacterial agents. The blade is made of high-carbon stainless steel "MBS-26," which is resistant to rust and has excellent sharpness durability. The weight of the knife feels good in your hand, and it is a well-balanced design that does not tire you out even after long hours of work. A single-edged blade is a knife with a back bevel on one side. The main benefit of a single sided blade is the taper of the blade comes to a finer edge; an added benefit of the single-sided blade is the ease of sharpening on stones, the majority of the sharpening process is done just on the face(front) side of the knife only a small amount of sharpening work is needed on the backside of the knife to straighten and align the edge. Learn More$192.75 -
Masahiro MV 10.5 in. Left Handed Gyuto
The Masahiro MV 10.5 in. (270mm) Left Handed is the Japanese analog of a western Chef's Knife. The gyuto is an all purpose kitchen knife that is used for most types of chopping, dicing, mincing, and slicing. Masahiro strives to create knives that are practical, tough and sharp this Gyuto is not as flashy as some other Japanese knives but that is intentional so that price stays competitive and so that added ingredients don't take away from the Proprietary base steel which is thick and tough. Since Masahiro’s founding, they have been dedicated to making knives in Seki City, the sword capital of Japan. The materials used in their knives are sourced in Japan. In addition, no part of the processing is outsourced overseas, and their parts are made in Japan. At Masahiro craftsmen carry out almost all processes from material selection to hardening and finishing sharpening at their main factory. Each and every knife is packed with the know-how of our veteran craftsmen. The sharpness of our knives is guaranteed by the handiwork of craftsmen who have been making knives for many years. They carefully assess the characteristics of each material and apply the optimal processing and sharpening to each knife. Flatter Profile blade than western chef knives, designed to slice not rock. This is a chef knife that is designed to tackle any task in the kitchen, hold an edge for an extended period of time and is very easy to resharpen to any desired angle. Masahiro randomly inspects their products for defects, each knife is hand sharpened by blacksmiths before being packaged and they ensure their products cutting ability using The Gifu Prefectural Product Technology Research Institute and their Honda-Type Paper Cutting Test Machine. This is a single-beveled knife and is intended to be sharpened on a whetstone, a ceramic rod can be used as well. Hand wash only. Learn More$244.50 -
Masahiro MV 9.5 in. Left Handed Gyuto
The Masahiro MV 9 in. (240mm) Left Handed Gyuto is the Japanese analog of a western Chef's Knife. The gyuto is an all purpose kitchen knife that is used for most types of chopping, dicing, mincing, and slicing. Masahiro strives to create knives that are practical, tough and sharp this Gyuto is not as flashy as some other Japanese knives but that is intentional so that price stays competitive and so that added ingredients don't take away from the Proprietary base steel which is thick and tough. Since Masahiro’s founding, they have been dedicated to making knives in Seki City, the sword capital of Japan. The materials used in their knives are sourced in Japan. In addition, no part of the processing is outsourced overseas, and their parts are made in Japan. At Masahiro craftsmen carry out almost all processes from material selection to hardening and finishing sharpening at their main factory. Each and every knife is packed with the know-how of our veteran craftsmen. The sharpness of our knives is guaranteed by the handiwork of craftsmen who have been making knives for many years. They carefully assess the characteristics of each material and apply the optimal processing and sharpening to each knife. This is a chef knife that is designed to tackle any task in the kitchen, hold an edge for an extended period of time and is very easy to resharpen to any desired angle. Masahiro randomly inspects their products for defects, each knife is hand sharpened by blacksmiths before being packaged and they ensure their products cutting ability using The Gifu Prefectural Product Technology Research Institute and their Honda-Type Paper Cutting Test Machine. This is a single-beveled knife and is intended to be sharpened on a whetstone, a ceramic rod can be used as well. Hand wash only. Learn More$192.75 -
Masahiro MV 8.25 in. Left Handed Gyuto
The Masahiro MV Series 8.25 in. (210mm) Left Handed Gyuto is the Japanese analog of a western Chef's Knife. The gyuto is an all purpose kitchen knife that is used for most types of chopping, dicing, mincing, and slicing. The weight and balance of this knife make it ideal for heavy duty work with thicker cuts of vegetables, fruits and meats. This gyuto is a chef knife made specifically for left handed people. Masahiro strives to create knives that are practical, tough and sharp this Gyuto is not as flashy as some other Japanese knives but that is intentional so that price stays competitive and so that added ingredients don't take away from the Proprietary base steel which is thick and tough. This is a chef knife that is designed to tackle any task in the kitchen, hold an edge for an extended period of time and is very easy to resharpen to any desired angle. Masahiro randomly inspects their products for defects, each knife is hand sharpened by blacksmiths before being packaged and they ensure their products cutting ability using The Gifu Prefectural Product Technology Research Institute and their Honda-Type Paper Cutting Test Machine. This is a single-beveled knife and is intended to be sharpened on a whetstone, a ceramic rod can be used as well. Hand wash only. Learn More$154.00 -
Masahiro MV Left Handed Sakabone
The Masahiro MV 6 in. (150mm) Left Handed Sakabone is a thicker and heavier blade which makes it appropriate for poultry, sucklings, chining and various butcher. A single edge knife along 2/3 of the blade. Up by the heel of the knife it is double ground and slightly dull for breaking though bones without chipping the blade. The Sakabone(Hankotsu) knife blade is made to be sturdy and tough, designed for separating meat from bones. The Sakabone is used to butcher hanging carcasses, and is held with the blade edge facing downwards in a reverse knife grip. With the durable edge and blade, Sakabone knife is useful knife and often used for cutting a fish, a chicken. The thumb can also be wrapped over the butt of the handle, which helps to prevent the hand slipping forwards on to the blade during piercing / stabbing cuts. Even if the hand does slip, the first third of the blade at the heel end is often not sharpened to prevent this type of injury, and is also useful for scraping. When cutting hanging meat, the cut is normally made using a downwards pulling motion. Westerner Chef's like this knife for tasks such as boning out strips, ‘Frenching’ racks, and cutting chops. The relatively narrow blade of the Hankotsu has an gently curved cutting edge, which is angled relative to the blade spine and also the center line of the handle. This works well for cutting hanging carcass, but depending on the item being cut, the knife does not always give enough knuckle clearance to cut directly over a cutting board. The blade edge terminates in a ‘reverse tanto’ tip / ‘clipped point’, which is perfect for piercing through skin and between joints or ribs. The thickness of the blade is a compromise between being strong and tough enough for heavy-duty cuts, whilst still being thin enough to fit in between the joints and ribs of carcasses. This blade geometry results in a stout but agile knife that is able to turn quickly when cutting around and along bones, and is also sharp enough for trimming connective tissue and fat, or for portioning meat. The MV line by Masahiro is the model that sets the standard for stainless steel professional knives.The handle is made of laminated reinforced wood with antibacterial agents. The blade is made of high-carbon stainless steel "MBS-26," which is resistant to rust and has excellent sharpness durability. The weight of the knife feels good in your hand, and it is a well-balanced design that does not tire you out even after long hours of work. A single-edged blade is a knife with a back bevel on one side. The main benefit of a single sided blade is the taper of the blade comes to a finer edge; an added benefit of the single-sided blade is the ease of sharpening on stones, the majority of the sharpening process is done just on the face(front) side of the knife only a small amount of sharpening work is needed on the backside of the knife to straighten and align the edge. Learn More$154.00 -
Masahiro MV Left Handed Honesuki
The Masahiro MV 6 in. (150mm) Honesuki Left Handed is a wedge shaped knife that works great when cutting and deboning a chicken or many other types of butchering duties which require a heavier blade. The Honesuki originated in Japan, where specialist chicken restaurants needed a knife to break down whole chickens, it is particularly suitable for people who prepare poultry and meat. The Honesuki features a ‘reverse tanto tip’ / ‘clip point’ design which increases tip strength whilst still allowing it to easily pierce skin, and to also make precise cuts in tight spaces such as joints. In addition, it is similarly able turn quickly when cutting around and along the bone, and can also easily trim away connective tissue and fat with the sharp and precise tip area. The MV line by Masahiro is the model that sets the standard for stainless steel professional knives.The handle is made of laminated reinforced wood with antibacterial agents. The blade is made of high-carbon stainless steel "MBS-26," which is resistant to rust and has excellent sharpness durability. The weight of the knife feels good in your hand, and it is a well-balanced design that does not tire you out even after long hours of work. A single-edged blade is a knife with a back bevel on one side. The main benefit of a single sided blade is the taper of the blade comes to a finer edge; an added benefit of the single-sided blade is the ease of sharpening on stones, the majority of the sharpening process is done just on the face(front) side of the knife only a small amount of sharpening work is needed on the backside of the knife to straigten and align the edge. Learn More$154.00 -
Masahiro MV Left Handed Utility Knife
Masahiro MV 6 in. (150mm) Left Handed Utility has decent knuckle clearance for a utility knife. Very sharp and edged on one side of the blade (80/20). Very useful for close, precise hand work like shallots, garlic, trimming fat etc.. Some Chefs with smaller hands like to use this as their main knife. Because the blade is narrow and thin, it glides right through food with a minimal amount of drag. If you're a fan of Jacques Pepin (and if not, you should be) you may notice that he uses this knife style for much of his basic slicing and dicing. Since Masahiro’s founding, they have been dedicated to making knives in Seki City, the sword capital of Japan. The materials used in their knives are sourced in Japan. In addition, no part of the processing is outsourced overseas, and their parts are made in Japan. At Masahiro craftsmen carry out almost all processes from material selection to hardening and finishing sharpening at their main factory. Each and every knife is packed with the know-how of our veteran craftsmen. The sharpness of our knives is guaranteed by the handiwork of craftsmen who have been making knives for many years. They carefully assess the characteristics of each material and apply the optimal processing and sharpening to each knife. The MV line by Masahiro is the model that sets the standard for stainless steel professional knives.The handle is made of laminated reinforced wood with antibacterial agents. The blade is made of high-carbon stainless steel "MBS-26," which is resistant to rust and has excellent sharpness durability. The weight of the knife feels good in your hand, and it is a well-balanced design that does not tire you out even after long hours of work. A single-edged blade is a knife with a back bevel on one side. The main benefit of a single sided blade is the taper of the blade comes to a finer edge; an added benefit of the single-sided blade is the ease of sharpening on stones, the majority of the sharpening process is done just on the face(front) side of the knife only a small amount of sharpening work is needed on the backside of the knife to straighten and align the edge. Learn More$102.25 -
Masahiro MV Left Handed Paring Knife
The Masahiro MV 4.5 in. (120mm) Left Handed is made of Molybdenum Vanadium(MBS-26) Stainless Steel. Ideal for cutting small to medium sized items like herbs, shallots, fruits, and vegetables. Heel is more prominent compared to traditional western paring knives. Can be used on cutting board as well as hand only. Since Masahiro’s founding, they have been dedicated to making knives in Seki City, the sword capital of Japan. The materials used in their knives are sourced in Japan. In addition, no part of the processing is outsourced overseas, and their parts are made in Japan. At Masahiro craftsmen carry out almost all processes from material selection to hardening and finishing sharpening at their main factory. Each and every knife is packed with the know-how of our veteran craftsmen. The sharpness of our knives is guaranteed by the handiwork of craftsmen who have been making knives for many years. They carefully assess the characteristics of each material and apply the optimal processing and sharpening to each knife. The MV line by Masahiro is the model that sets the standard for stainless steel professional knives.The handle is made of laminated reinforced wood with antibacterial agents. The blade is made of high-carbon stainless steel "MBS-26," which is resistant to rust and has excellent sharpness durability. The weight of the knife feels good in your hand, and it is a well-balanced design that does not tire you out even after long hours of work. A single-edged blade is a knife with a back bevel on one side. The main benefit of a single sided blade is the taper of the blade comes to a finer edge; an added benefit of the single-sided blade is the ease of sharpening on stones, the majority of the sharpening process is done just on the face(front) side of the knife only a small amount of sharpening work is needed on the backside of the knife to straighten and align the edge. Learn More$93.75 -
Masahiro MV Nakiri
The Masahiro MV 6.5 in. (165mm) Nakiri provides for very clean, straight cuts and is used by sushi chefs to roll-cut cucumbers into very long thin sheets. This knife is ideal for cutting, chopping and mincing fruits and vegetables. Nakiri knives feature a very flat blade profile and a wide body for a comfortable choke grip. Nakiri knives tend to work best for prepping vegetables as they allow the user to make very fine cuts like julienne, tourne, fine dice and even peeling cucumber and daikon radishes. With the MV Steel used in this Nakiri the cook will find this knife is very easy to hone and sharpen when it finally starts to dull as the majority of the sharpening will be done on the face side of the blade and the steel is very responsive to ceramic rods and whetstones. Since Masahiro’s founding, they have been dedicated to making knives in Seki City, the sword capital of Japan. The materials used in their knives are sourced in Japan. In addition, no part of the processing is outsourced overseas, and their parts are made in Japan. At Masahiro craftsmen carry out almost all processes from material selection to hardening and finishing sharpening at their main factory. Each and every knife is packed with the know-how of our veteran craftsmen. The sharpness of our knives is guaranteed by the handiwork of craftsmen who have been making knives for many years. They carefully assess the characteristics of each material and apply the optimal processing and sharpening to each knife. The MV line by Masahiro is the model that sets the standard for stainless steel professional knives.The handle is made of laminated reinforced wood with antibacterial agents. The blade is made of high-carbon stainless steel "MBS-26," which is resistant to rust and has excellent sharpness durability. The weight of the knife feels good in your hand, and it is a well-balanced design that does not tire you out even after long hours of work. A single-edged blade is a knife with a back bevel on one side. The main benefit of a single sided blade is the taper of the blade comes to a finer edge; an added benefit of the single-sided blade is the ease of sharpening on stones, the majority of the sharpening process is done just on the face(front) side of the knife only a small amount of sharpening work is needed on the backside of the knife to straighten and align the edge. Learn More$112.50 -
Masahiro MV Santoku
The Masahiro MV 6.75 in. (175mm) Santoku was developed in Japan as a knife that combines the advantages of both a nakiri knife (a Japanese knife) and a gyuto knife (a Western knife). Santoku knives feature a very flat blade profile and a wide body for a comfortable choke grip. Santoku knives are considered all purpose but tend to work best for prepping vegetables as they allow the user to make very fine cuts like julienne, tourne, fine dice and even peeling cucumber and daikon radishes. With the MV Steel used in this Santoku the cook will find this knife is very easy to hone and sharpen when it finally starts to dull as the majority of the sharpening will be done on the face side of the blade and the steel is very responsive to ceramic rods and whetstones. Since Masahiro’s founding, they have been dedicated to making knives in Seki City, the sword capital of Japan. The materials used in their knives are sourced in Japan. In addition, no part of the processing is outsourced overseas, and their parts are made in Japan. At Masahiro craftsmen carry out almost all processes from material selection to hardening and finishing sharpening at their main factory. Each and every knife is packed with the know-how of our veteran craftsmen. The sharpness of our knives is guaranteed by the handiwork of craftsmen who have been making knives for many years. They carefully assess the characteristics of each material and apply the optimal processing and sharpening to each knife. The MV line by Masahiro is the model that sets the standard for stainless steel professional knives.The handle is made of laminated reinforced wood with antibacterial agents. The blade is made of high-carbon stainless steel "MBS-26," which is resistant to rust and has excellent sharpness durability. The weight of the knife feels good in your hand, and it is a well-balanced design that does not tire you out even after long hours of work. A single-edged blade is a knife with a back bevel on one side. The main benefit of a single sided blade is the taper of the blade comes to a finer edge; an added benefit of the single-sided blade is the ease of sharpening on stones, the majority of the sharpening process is done just on the face(front) side of the knife only a small amount of sharpening work is needed on the backside of the knife to straighten and align the edge. Learn More$112.50
