You have no items in your shopping cart.
Sharpening Stones
-
RH Preyda 1000/6000 Combination Grit Arkansas Stone
Precision Engineering Meets Natural Performance: The Ultimate 1000/6000 Dual-Grit Arkansas Stone For the professional chef or the serious tool enthusiast, a knife is only as good as its edge. The RH Preyda 1000/6000 Grit Combination Arkansas Stone represents the pinnacle of natural sharpening technology. Unlike mass-produced synthetic stones that wear down quickly and require frequent flattening, this stone is crafted from natural Novaculite—a rare, silica-rich rock found only in the Ouachita Mountains of Arkansas. This unique mineral composition provides a dual-benefit that synthetic stones cannot match: extreme abrasiveness for rapid metal removal and incredible hardness for long-term stone flat-retention. The result is a 'quicker dull-to-sharp' process that saves you time and ensures your high-carbon or stainless steel blades receive a consistent, razor-sharp edge every time. The Versatility of Two Stones in One This 8" x 3" powerhouse features two distinct grits bonded into a single, convenient block. The 1000 Grit Surface: Designed for the initial sharpening phase. This side is aggressive enough to reset a dull edge, remove micro-chips, and establish the primary bevel without removing excessive material. The 6000 Grit Surface: Once the edge is established, flip the stone to the ultra-fine 6000 grit side. This surface hones the metal to a mirror-like polish, refining the edge for surgical precision in slicing, dicing, and detail work. Built for stability, the stone includes a non-slip silicone base, ensuring your sharpening strokes remain steady and safe, whether you are working in a fast-paced professional kitchen or a home workshop. Learn More$78.50 -
Pride Abrasive 1000/6000 Grit Combination Stone
Pride Abrasive 1000/6000 Grit Combination Stone made in USA using the highest quality ingredients. The 1000 Grit is one of the best stones on the market today to set bevels and develop a burr on most high end kitchen knives. The 6000 will smooth and refine the work done on the 1000 grit. A proficient sharpener might be able to the the whole sharpening processes with the one stone, if your knife has damage more stones may be required. Made In USA. Learn More$65.95 -
Norton 1000/4000 grit Combination Waterstone
These stones vary from the Japanese in two key areas.
The grit size is just a bit coarser. (There is no International Standard for grit sizes)
The bonding agent is softer than a premium Japanese stone. I don't know that they actually wear faster though, because they produce results much more quickly. I really like the finish produced by the 4000 grit and we use it regularly.
We actually like these stones quite a bit. Nice size, sturdy plastic box that also serves as a stand for the stone. Be very careful to not push the edge into the stone. Draw the knife towards you with the edge facing away. Please call or email with any questions.
Dimensions: 8 x 3 x 1 in. Learn More$100.00 -
Naniwa Multi Stone (Waterstone) 1000/3000 Grit
Naniwa Multi Stone 1000/3000 Grit. This reliable Naniwa 1000/3000 is a great starter stone for someone with no stone collection at all. The 1,000 (Red) for setting an edge and creating a burr, and the 3,000 (Yellow) for smoothing and polishing the edge. The high amount of bonding agent used in this stone is typical of Japanese made waterstones, so they will last, however the price is much more digestible than comparable stones from Japan.
Made in Vietnam. Learn More$32.95 -
Pride Abrasives 1000/3000 Grit Waterstone
The Pride Abrasive combination waterstone features a 1000 grit and a 3000 grit which are bonded together to give to buyer the most important two stones in one purchase. The 1000 Grit stone is used on dull knives to put a new edge (bevel) on the knife this grit will leave a toothy, or jagged, edge that needs to be smoothed a refined with the 3000 Stone. These two stones can effectively sharpen a knife but if you are going to cut protein a higher grit may be desired. Comes in a wooden presentation box.
Made in USA.
Dimensions: 8"x3"x1" Learn More -
Naniwa 1000 grit Traditional Waterstone
Naniwa’s Traditional Water Stones are specially designed for sharpening hard steels commonly found in woodworking tools and select specialty knives. This Hard Steel series runs parallel to Naniwa’s Standard Traditional Stones but is engineered for enhanced performance on tough steels. Featuring a harder binder, these stones provide a more aggressive sharpening action while minimizing wear, making them ideal for the unique demands of hard steel applications. 1000 Grit: This stone is a very popular grit choice because it starts to refine the edge. This stone is an excellent follow-up after using the 220 stone. If your edge isn't very worn, you don't need to start any coarser than this. Learn More$42.95 -
Pride Abrasives 1000 grit Waterstone
Pride Abrasives 1000 grit Waterstone (cream) 14 microns. Made in the USA. Pride stones use a unique vitrification process on the Aluminum Oxide, ensuring these stones form a burr quicker and stay flatter longer. Use this 1000 grit stone for general knife maintenance and to bring the edges together to form a burr. Learn More$56.95 -
RH Preyda 1000 Grit Arkansas Waterstone
The Hardest Working Foundation for Every Professional Edge When maintaining a professional kitchen or workshop, the 1000 grit stone is your most critical asset. It is the workhorse of the sharpening station, responsible for the heavy lifting of edge restoration and geometry correction. The RH Preyda 1000 Grit Arkansas Waterstone represents a Tier-1 upgrade over standard synthetic stones by utilizing 100% natural Novaculite. Found exclusively in the Ouachita Mountains of Arkansas, this rare geological formation provides a unique combination of high abrasiveness and incredible structural hardness. Why Natural Novaculite Trumps Synthetic Most synthetic stones on the market use aluminum oxide or silicon carbide, which can 'dish' or hollow out quickly under heavy use, requiring constant flattening with a diamond plate. The natural density of the RH Preyda Novaculite ensures your stone stays true significantly longer. This translates to more consistent angles across the entire length of your blade and a 'quicker dull-to-sharp' process that respects your time. Expert Application Insight While ultra-fine stones provide the mirror polish, the 1000 grit is the mandatory first step for any knife that has lost its daily utility edge. This stone is designed for those who demand efficiency and precision. It provides the 'bite' necessary to reset a bevel before transitioning to finishing stones. Measuring a generous 8″ x 3″ x 1″, this massive surface area provides the stability needed to accommodate everything from delicate paring knives to heavy 10-inch chef’s knives and cleavers. Crafted in the U.S.A., it includes a custom-fit silicone non-slip base, ensuring that even under the pressure of professional sharpening, your stone remains exactly where you need it. Learn More$73.00 -
Naniwa 1000 Grit Professional (Chosera) Stone
The Apex of Sharpening: Naniwa 1000 Professional Stone For the craftsman who understands that the edge is everything, there is the Naniwa 1000 Professional Stone. This is not merely a tool for sharpening; it is the heart of a precision sharpening system, revered globally by master chefs, woodworkers, and knife enthusiasts for delivering an unparalleled sharpening experience. At the 1000-grit level, it is the quintessential workhorse—aggressively re-establishing a flawless primary bevel on a dull blade while leaving a refined, toothy edge ready for the most demanding cuts. The soul of this stone lies in its advanced magnesia-bonding process. This proprietary method creates a supremely dense yet friable surface, packed with a higher concentration of premium abrasive. The result is a sharpening sensation that must be felt to be believed: a swift, almost effortless cutting action with a smooth, velvety feedback that communicates the state of the edge directly to your hands. As you work, it generates a rich, uniform slurry that aids in polishing the steel, creating the beautiful, hazy kasumi finish prized on high-end Japanese cutlery. This is more than a purchase; it's an investment in the art of sharpening. Choose the Naniwa Professional when you seek not just a sharp knife, but mastery over the edge itself. Learn More$83.95 -
Naniwa 1000 grit Ceramic Super Stone
Size: (210x70x20 mm) (8.25x2.75x.80 in.)
Naniwa "Super Stones" require no soaking, just splash and go. The 1000 grit stone is used for establishing an edge on a dull knife. It will remove micro-pitting but any chips will require a more coarse stone. This is the average size used for sharpening a dull knife. For use on meats, you may want to continue sharpening with a higher grit but will work great on vegetables. Learn More$63.45
