You have no items in your shopping cart.
Sharpening Stones
-
Naniwa 8000 grit Ceramic Super Stone
Size: (210x70x20 mm) (8.25x2.75x.80 in.)
The higher grit allows this stone to be used for both sharpening and polishing. However, it shouldn't be used as just a polisher. Since the grain count is higher than 6000, this waterstone will finely tune the edge of your knife allowing it to be sharpened and polished. Do not soak, just a splash and go.
Learn More$85.95 -
Naniwa 800 grit Ceramic Super Stone
Naniwa Super Stones require no soaking, just a splash and go.
Whereas the 1000 grit is normally considered the starter stone for an undamaged knife, if you're doing a lot of sharpening and want to save time, the 800 is faster. You can then skip the 1000 and move directly to a 3000 grit. No need to soak the stone, just splash and go. Learn More$59.60 -
Naniwa 800 Grit Professional (Chosera) Stone
Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go. Learn More -
Naniwa Pro 600 Grit Stone
The Naniwa Professional 600 Grit Ceramic Stone cuts quickly making this a great first stone to quickly sharpen knives that are very dull or made from very hard steels. This is also an ideal stone for fixing small imperfections.This stone cuts quickly without removing an excess of material or leaivng an overly rough edge. The edge coming off of this stone is smooth enough to transition immediately to a 2000 or 3000 grit stone. While this stone is a bit too aggressive for daily use, this is a great stone to have in your arsenal when you need to sharpen quickly. This is a good choice for someone who is comfortable with their sharpening technique and wants to work quickly. Size: 8.25 inches x 2.75 inches x 0.8 in. inches (210 mm x 70 mm x 20 mm) Learn More$73.25 -
Naniwa 5000 grit Ceramic Super Stone
The material is made from a new resin bonding agent which allows for a higher concentration of abrasive particles. The higher abrasive levels enhance the tactile feel of the stone while improving the time of sharpening. Learn More$76.95 -
Naniwa 5000 Grit Professional (Chosera) Stone
Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go. Learn More$149.50 -
Naniwa 400 Grit Professional (Chosera) Stone
The Naniwa Professional 400 Grit Ceramic Stone is the coarsest stone in the Professional series. This stone is designed to cut very quickly and to remove a lot of steel. Although ceramic stones are by nature less aggressive than traditional or oil stones this stone does move a sustantial amount of steel. We recommend this stone for re-profiling, reshaping and thinning blades, removing chips, repairing tips and other heavy work that requires quick cutting. The 400 grit can also be used as an initial stone for confident sharpeners who want to speed up their work, but we don't recommend using this as your go-to primary stone. This will leave a fairly rough edge that needs to be followed by a smoother stone. We'd recommend moving from this stone to a 1000 grit before you finish on a high-grit polishing stone. Learn More$71.25 -
Naniwa 3000 Grit Ceramic Super Stone
Size: (210x70x20 mm) (8.25x2.75x.80 in.)
The Naniwa 3000 grit Ceramic Super Stone makes for a great final stone, a perfect step-up from the 1,000 grit stone. It is fine enough to be used prior to using a finer grit such as an 8,000 grit water stone.
The higher abrasive levels contribute to the ease of sharpening. No need to soak the stones in water, just give it a splash and go. Do not soak the stone. Learn More$72.95 -
Naniwa Large 24 Grit Flattening Stone
Dimensions: 11.8 in x 5.9 in x 0.8 in 24 grit Coarse carbide stone Promotes maximum cutting for all grit sizes of whetstones. Produces extremely flat results on all water stones, ceramic or traditional. Flattener and stone should be wet before use. This large flattening stone comes with rubber feet and is designed to be laid flat in a sink bottom while you hold the stone and run it across the flattener. Extra coarse for fast cutting. We use these because of the high volume of hand sharpening. This cuts quickly, but can leave fine grooves in the higher grit stones, which should be smoothed with your dressing stone. For persons doing a more normal volume of sharpening, the large 220 grit provides the benefit of truer flat without the grooving, it just takes longer. (Most flattening stones are around 220 grit) Learn More$65.00 -
Naniwa Regular 220 Flattening Stone
Promotes maximum cutting for all grit sizes of whetstones. Learn More$24.95
