Steel Sharpening Rods

Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.

Items 11 to 20 of 29 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • Zwilling Bob Kramer Double-Cut Sharpening Steel

    Zwilling has discontinued production of all Bob Kramer products. This was a highly rated honing rod by America’s Test Kitchen, but we offer similar, if not better, substitute rods that combine fine-cut and smooth surfaces.See the Friedr. Dick combination rods, the F. Dick 10-inch square combination steel and the F. Dick Dickoron 12-inch round combination steel, and the Victorinox combination rods, the Victorinox 10-inch combination steel and the Victorinox 12-inch combination steel. Learn More
  • Victorinox 12-inch Combination Cut Honing Steel

    The Victorinox 12-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.The 12-inch rod covers knives up to 10 inches, such as the Fibrox Pro 10-inch Butcher Knife, so the whole edge meets the steel on every stroke. It is made in Sheffield, England, with a plastic handle and a ring for hanging.Wipe the rod after use and hang it by its ring.For a shorter rod, see the Victorinox 10-inch Combination Steel. For a polishing surface alone, the Victorinox 10-inch Round Polish Steel. Our Honing Rod Guide explains each cut. Learn More
  • Victorinox 12-inch Regular Cut Honing Steel, Black Handle

    Over hundreds of cuts, the very edge of a knife rolls to one side and the knife stops biting into food. The Victorinox 12-inch regular cut honing steel realigns that edge with a few light strokes, restoring cutting performance without removing metal the way a sharpener does.The 12-inch rod is long enough for 10-inch chef’s knives and slicers and for butchery knives such as the Fibrox Pro 10-inch Scimitar, so the whole edge passes along the steel in one stroke.Hone before each work session, with the tip of the steel resting on a towel. Light, even strokes on alternate sides do more than heavy ones.Steel this length also hangs well on a hook at the station, where it is in reach for a few strokes between tasks.For a finer surface at this length, see the Victorinox 12-inch Fine Cut Honing Steel. The Victorinox 12-inch Combination Steel adds a polishing face. Our Honing Rod Guide explains each cut. Learn More
  • Victorinox 12-inch Helical Cut Steel

    The Victorinox 12-inch helical cut steel is used for removing burrs and setting an edge. It is a coarse steel, used mainly on hunting knives and cleavers or together with a finer or ceramic rod.As an example, we use one as part of our own knife sharpening process. On a damaged knife, we grind the blade to remove chips or reshape a broken tip, and this rod removes the heavy burr before the next phase of sharpening.It would not be used for normal edge maintenance, where you want a finer steel. Follow it with a regular or fine cut to refine the edge.Keep it separate from the honing steels used for daily work, so a coarse rod is not picked up by mistake.For daily honing, see the Victorinox 12-inch Regular Cut Honing Steel or the Victorinox 12-inch Fine Cut Honing Steel. Our Honing Rod Guide explains where a coarse steel fits. Learn More
  • F. Dick EuroCut 12-inch Oval Fine Cut Steel

    Butchers, sushi chefs and meat processors want an edge that cuts flesh without tearing, and this 12-inch EuroCut oval steel with a fine cut gives it. The edge is finer than a regular cut leaves, so slices of meat and fish come away clean.An oval face spreads contact across a wider area of the edge, which makes it easier to keep the angle steady during quick touch-ups at the board. The fine grooves remove little metal, so the rod can be used throughout a shift without wearing the knife down. The length suits slicers and breaking knives as well as chef’s knives.A light touch is all it needs.For more bite on vegetables, the EuroCut 12-inch oval regular cut steel is the sibling. A round version of this cut is the EuroCut 12-inch round fine cut steel, and a fine cut oval with a non-slip handle is the FineCut 12-inch oval steel. Learn More
  • F. Dick EuroCut 12-inch Round Fine Cut Steel

    The EuroCut fine cut has lighter lines than the regular cut, so it leaves a smoother, less roughened edge. That edge slices fish and beef cleanly without tearing, which makes this 12-inch round steel a good choice for portioning and carving.Fine cut steels remove less metal and mainly straighten a rolled edge, so they suit knives that are honed regularly and kept sharp. The round profile gives precise contact along curved blades such as boning knives and scimitars. Twelve inches lets a long slicer pass the rod in one stroke.It is a good second steel beside a regular cut.For more bite on vegetables, the round regular cut sibling is the EuroCut 12-inch Round Regular Cut Steel, our best-selling steel overall. An oval version of this rod is the EuroCut 12-inch oval fine cut steel. For a finer finish still, serious professionals choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More
  • F. Dick EuroCut 12-inch Oval Regular Cut Steel

    When cooks come to our store looking for a honing tool, the EuroCut 12-inch oval is the model Chef David recommends. It offers F. Dick’s regular cut on an oval rod at a working-kitchen build.The oval shape makes the honing angle more forgiving to find, and the wider face reaches the whole edge from heel to tip. Regular cut grooves straighten a rolled edge and restore bite on chef’s knives, slicers and boning knives. F. Dick tapers and balances the rod so each stroke feels the same along its length.It also fits a full-size knife roll.Our best-selling steel overall is the round version, the EuroCut 12-inch Round Regular Cut Steel. For a finer finish on meat and fish, the EuroCut 12-inch oval fine cut steel is the sibling. Cooks who want a heavier rod with a metal finger guard can compare the F. Dick 12-inch oval butcher steel. Learn More
  • F. Dick EuroCut 12-inch Round Regular Cut Steel

    This is the best-selling steel in our shop. The EuroCut line puts the same F. Dick rod, with the same warranty, in a less expensive handle, so the money goes into the part that touches the knife. For American and German knives, it is the best value in a honing rod we carry.Regular cut has noticeably more texture than fine cut. That extra bite keeps a working edge on knives that see heavy daily use, and it helps on tough or waxy produce such as tomatoes and bell peppers, which a fine cut can struggle with. At 12 inches, the rod is long enough to hone a 10-inch chef’s knife or slicer in one full stroke. The round profile is the one compromise, since a round rod can roll off a counter where an oval one will not.
    Regular or Fine Cut?For a gentler touch-up on knives that are already sharp, the F. Dick EuroCut 12-inch Round Fine Cut Steel has the same handle and length with less texture. If you would rather have more contact with the blade and a rod that stays put on the counter, choose the F. Dick EuroCut 12-inch Oval Regular Cut Steel. Our Honing Rod Guide explains how to match a rod to your knives. Learn More
  • F. Dick Dickoron Multiron 12-inch Oval Steel

    The Multiron combines a fine cut and a regular cut in one oval rod. Under light pressure it hones smoothly, and with more pressure slight indentations along the rod increase the abrasion to straighten damaged or burred edges.We like this steel at Knife Merchant because you can feel any problem areas on the knife as it passes. A bad spot on the edge announces itself by touch, so the cook knows where to work, and regular use on this rod lets a knife go longer between sharpenings. The cuts are fine and even for a consistent result along the 12-inch length.For a flat rod with fine and regular cuts, the F. Dick MultiCut 11-inch flat steel takes a similar approach. A single fine cut is the EuroCut 12-inch oval fine cut steel, and a finer Dickoron finish is the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More
  • F. Dick FineCut 12-inch Oval Steel with Non-Slip Handle

    The FineCut surface looks different from most steels, with grooves shaped like a run of S curves rather than straight lines. It removes a burr and smooths the edge without leaving micro-serrations, so it is recommended for Japanese knives as well as German ones.At 12 inches, the rod gives long slicers and 10-inch chef’s knives a full stroke from heel to tip. The oval profile presents a wide face that makes the angle easier to hold. A rod that actually straightens the edge and holds up under heavy use is what keeps a busy kitchen cutting cleanly between sharpenings.For a cook with both German and Japanese knives, one fine cut rod can look after the whole roll.A shorter version is the FineCut 10-inch oval steel, and a round profile is the FineCut 12-inch round steel. For more bite, the 12-inch oval regular cut steel with non-slip handle has the same shape. Learn More

Items 11 to 20 of 29 total

per page

Page:
  1. 1
  2. 2
  3. 3