You have no items in your shopping cart.
Steel Sharpening Rods
Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.
-
Victorinox 12-inch Regular Cut Honing Steel, Black Handle
Over hundreds of cuts, the very edge of a knife rolls to one side and the knife stops biting into food. The Victorinox 12-inch regular cut honing steel realigns that edge with a few light strokes, restoring cutting performance without removing metal the way a sharpener does.The 12-inch rod is long enough for 10-inch chef’s knives and slicers and for butchery knives such as the Fibrox Pro 10-inch Scimitar, so the whole edge passes along the steel in one stroke.Hone before each work session, with the tip of the steel resting on a towel. Light, even strokes on alternate sides do more than heavy ones.Steel this length also hangs well on a hook at the station, where it is in reach for a few strokes between tasks.For a finer surface at this length, see the Victorinox 12-inch Fine Cut Honing Steel. The Victorinox 12-inch Combination Steel adds a polishing face. Our Honing Rod Guide explains each cut. Learn More$34.15 -
Victorinox 10-inch Regular Cut Honing Steel
The Victorinox 10-inch regular cut steel is commonly mistaken for a knife sharpener. A honing steel maintains a knife’s edge and improves its cutting ability by pushing the rolled edge back into line, so the knife keeps cutting cleanly between sharpenings.We recommend a honing steel or rod about 2 inches longer than your longest knife for easier use. A 10-inch steel suits kitchens whose longest blade is an 8-inch chef’s knife, such as the Fibrox Pro 8-inch Chef’s Knife, and it fits a standard knife block.A regular cut has fine lengthwise grooves that realign the edge with a few light strokes. Use it before each prep session, and sharpen on a stone when honing no longer brings the edge back.For a finer surface, see the Victorinox 12-inch Fine Cut Honing Steel. The Victorinox 12-inch Regular Cut Honing Steel is the longer version. Our Honing Rod Guide explains honing in detail. Learn More$32.40 -
F. Dick EuroCut 12-inch Oval Regular Cut Steel
When cooks come to our store looking for a honing tool, the EuroCut 12-inch oval is the model Chef David recommends. It offers F. Dick’s regular cut on an oval rod at a working-kitchen build.The oval shape makes the honing angle more forgiving to find, and the wider face reaches the whole edge from heel to tip. Regular cut grooves straighten a rolled edge and restore bite on chef’s knives, slicers and boning knives. F. Dick tapers and balances the rod so each stroke feels the same along its length.It also fits a full-size knife roll.Our best-selling steel overall is the round version, the EuroCut 12-inch Round Regular Cut Steel. For a finer finish on meat and fish, the EuroCut 12-inch oval fine cut steel is the sibling. Cooks who want a heavier rod with a metal finger guard can compare the F. Dick 12-inch oval butcher steel. Learn More$37.70 -
F. Dick EuroCut 12-inch Round Regular Cut Steel
This is the best-selling steel in our shop. The EuroCut line puts the same F. Dick rod, with the same warranty, in a less expensive handle, so the money goes into the part that touches the knife. For American and German knives, it is the best value in a honing rod we carry.Regular cut has noticeably more texture than fine cut. That extra bite keeps a working edge on knives that see heavy daily use, and it helps on tough or waxy produce such as tomatoes and bell peppers, which a fine cut can struggle with. At 12 inches, the rod is long enough to hone a 10-inch chef’s knife or slicer in one full stroke. The round profile is the one compromise, since a round rod can roll off a counter where an oval one will not.
Regular or Fine Cut?For a gentler touch-up on knives that are already sharp, the F. Dick EuroCut 12-inch Round Fine Cut Steel has the same handle and length with less texture. If you would rather have more contact with the blade and a rod that stays put on the counter, choose the F. Dick EuroCut 12-inch Oval Regular Cut Steel. Our Honing Rod Guide explains how to match a rod to your knives. Learn More$26.65 -
F. Dick 10-inch Round Regular Cut Steel with Non-Slip Handle
A non-slip handle matters when the hands are wet or greasy, and this 10-inch round F. Dick steel pairs one with a regular cut for everyday honing. It suits meat cutters and cooks who hone throughout a shift.F. Dick cuts the grooves deep and even, so the rod hones consistently and keeps its bite with use. The handle is sealed to the rod, which keeps it suitable for processing plants and busy kitchens with strict cleaning routines. Ten inches fits a standard knife block and suits boning, utility and chef’s knives up to about 8 inches.Keep it within reach of the cutting board so a few strokes between tasks become part of the routine.For longer knives, the 12-inch and 14-inch versions add reach. An oval rod with the same handle is the 12-inch oval regular cut steel with non-slip handle. For a finer finish, see the FineCut 10-inch oval steel. Learn More$38.35 -
F. Dick Red Spirit 10-inch Round Regular Cut Steel
With its red handle, this 10-inch round steel completes the Red Spirit knife series and keeps those knives honed with a standard cut. Knives need regular attention on a steel to stay truly sharp, and this rod makes that part of the routine.The round shape is symmetrical in the hand and guides the knife in a smooth, even stroke. The handle holds firm in a wet hand. Ten inches is long enough for the Red Spirit chef’s knife and the AJAX, and it suits the series’ paring and boning knives too.Keep it by the board so a few strokes before each task become a habit, and the Red Spirit edge will stay keen between sharpenings.Pair it with the Red Spirit 8.5-inch chef’s knife or the Red Spirit Pit Master BBQ set. For the 10-inch Hektor scimitar, a longer rod such as the F. Dick 12-inch round steel with non-slip handle gives more room. Learn More$70.85 -
F. Dick 2.75-inch Pocket Steel
Anglers, hunters and campers can carry this F. Dick pocket steel for quick touch-ups away from the kitchen. The regular cut rod brings back the edge on a pocket knife or a fillet knife wherever it is needed.To store it, unscrew the rod and screw it back in reversed, inside the handle, which protects the cut and keeps it from snagging in a pocket or tackle box. The rod resists corrosion, so it can sit in a bag between trips without rusting. It is small enough to keep in a glove box as well.Before a trip, check that the rod is screwed in firmly so it cannot work loose in a pack.For a field kit with room for a longer rod, the F. Dick 8-inch coarse cut steel gives more length. At home, the F. Dick 10-inch round regular cut steel fits a knife block. A fishing knife to carry with it is the ErgoGrip 4-inch fishing knife. Learn More$15.60 -
Miyabi Birchwood SG2 9-inch Honing Rod
This 9-inch honing rod is made to match the Miyabi Birchwood line. Birchwood knives do not need regular honing; the rod is for the occasional touch-up that brings back the bite of an edge between whetstone sharpenings.Hold the rod vertically on the board and draw the knife down it at the same low angle as the factory edge, with light pressure and alternating sides. A few strokes are enough on a hard steel.It suits the Birchwood 8-inch chef’s knife and other Birchwood knives. Owners of Miyabi Black should use the Black tungsten honing rod. Learn More$234.95 -
Wüsthof 9-inch Honing Steel
A honing steel does not grind a new edge. It realigns the fine edge of a knife, which rolls slightly to one side with everyday cutting and makes a sharp knife feel dull. A few strokes on the Wüsthof 9-inch honing steel before you cook straighten that edge and restore clean, easy cuts.The 9-inch rod suits knives up to about 8 inches long, which covers a standard chef’s knife, a santoku and every utility and paring knife in the drawer. It is short enough to store in a drawer or the steel slot of a knife block.When should you hone? A few strokes each time you use the knife keep the edge in line, and sharpening becomes an occasional job. When honing no longer brings the edge back, the knife needs sharpening; the Wüsthof 10-inch ceramic sharpening rod or the two-stage hand-held sharpener will do that. For 10-inch chef’s knives and slicers, choose a 10-inch honing steel. Our guide to honing steels walks through the technique. Learn More$34.95 -
F. Dick 12-inch Oval Regular Cut Butcher Steel
An oval face makes it easier to find and hold the honing angle, and this 12-inch F. Dick butcher steel pairs that shape with a regular cut and a metal finger guard. It suits cooks who want a more forgiving rod than a round steel.The regular cut grooves leave the edge with a little bite, which helps when slicing tomatoes and other vegetables thinly, and the edge also cuts proteins well. A couple of strokes on each side are enough to bring back a knife that has started to slide. The guard adds balance, and the hang ring keeps the steel at hand.The oval shape is also easier to learn on.A round version is the 12-inch round butcher steel. For a lighter oval rod, the EuroCut 12-inch oval regular cut steel is another choice. A smoother finish comes from an oval fine cut such as the EuroCut 12-inch oval fine cut steel. Learn More$66.30
