Sharpening Steels

The F. Dick 10 in. Oval Diamond Sharpening Steel is 600 grit oval and solid, excellent quality. The diamond is well adhered to the steel. Oval shape provides maximum contact with the knife edge, and very few manufacturers use solid steel construction. This is a premier diamond rod on the market today most diamond rods are vastly inferior as the put a light coat of diamond dust to coat the exterior of the steel which flakes off entirely with only a couple of uses. This German made diamond rod has the diamond material ingrained in the steel and will last years instead of months. If you buy cheap Chinese diamond steels you will get poor results, by real German made products and take your edge more seriously. Made in Germany. Learn More

The F. Dick Regular Cut Oval honing rod with black plastic handle is Friedrich Dick's entry line into their world of sharpening steels, the quality of the rod will be the same as other regular cut rods from F. Dick but the handle is basic and therefore cuts down on the cost of the product. The honing rod is a regular cut and will align a beveled edge on most knives, if your knife has a very high Rockwell Hardness (Above 60) we recommend a different cut like the Titan or Nitro honing rods. This is a honing product meaning that it will straighten and align edges and burnish your blades edge making it smooth for clean cutting. Learn More

The F. Dick Dark Nitro is a new innovation in German manufacturing using new state of the art techniques to develop harder steel knives with tighter grain structures and higher HRC. In doing so Friedrich Dick needed to Develop steels that can straighten and align the edge on harder steeel knives. This unique Dark Nitro Steel has a special surface for very high abrasion and is therefore particularly suitable for hard knives. The oval shape of the blade provides large contact for the knife and therefore more effective sharpening results. The pear-shaped handle design sits comfortably and safely in the hand. This is truly a one of a kind German masterpiece brought to you by the company that has been pioneering honing steels since the early 1800's. 

Learn More

The F. Dick 12 in. Oval Regular Cut Steel is the best grit for traditional German and American knives. With a wider surface area than the standard round cut and a comfortable Non-Slip Plastic Handle this is an excellent choice for working professionals. This knife is made to the highest standard in honing by a company that has been the world leader in honing steel production since the 1800's. The red non slip handle is great for industrial use as it is hygienically sealed for cleanliness and won't slip while honing. Made in Germany.  Learn More

The F. Dick EuroCut 12 in. Oval Fine Cut Sharpening Steel with Black Plastic Handle is the ideal honing tool for butchers, sushi chefs and meat processors alike. The Fine cut edge puts a slightly finer edge on your knife than the regular cut which is suited for cutting meat and fish without tearing. F. Dick ensures their honing tools are perfectly tapered, entirely hygienic and well balanced. Made in Germany. Learn More

The F. Dick EuroCut 12 in. Oval Regular Cut Steel with Black Plastic Handle is the best value Oval steel on the market today. In fact when cooks come to our Knife Merchant store looking for honing tools this is the go to model Chef David will recommend. The oval shape makes hitting the ideal 15 to 20 degree angle more fool proof and the wider surface area ensures the user gets the entire edge from heel to tip. F. Dick has been the leader in steel honing rod production since the early 1800's and has pioneered many of the techniques used to taper, harden and balance their steels so that each rod is a masterpiece. Made in Germany. Learn More

The F Dick Multiron Steel is ribbed so as to aggressively catch burred or bent edges. The surface is fine-cut. So, with pressure, you can easily straighten damaged or burred edges. With light pressure, it hones nicely. This is a favorite steel at Knife Merchant as you can really feel any problem areas on the knife. You'll know by touch when you have a bad spot and using this steel really allows you to go a lot longer between sharpening. F. Dick has been producing and innovating honing products longer than any other manufacturer, they have state of the art manufacturing techniques that make this steel perfectly cut and tapered so the user gets the best results from their knife's edge. Made in Germany. Learn More

The Precision Edge: Why the F. Dick 10-Inch Fine Cut Oval Steel is a Butcher’s Essential When you are working a high-volume line or an industrial processing shift, your knife’s edge is under constant assault. The F. Dick 10-inch Fine Cut Oval Steel is not a generic sharpening rod; it is a specialized maintenance tool designed to keep high-carbon German alloys and harder Japanese steels in peak condition throughout the day. What sets this steel apart is its unique surface geometry. Unlike standard steels that feature straight vertical grooves, the F. Dick Fine Cut utilizes a series of 'S' shaped patterns. This specialized texture excels at drawing a burr away from the edge and realigning the steel at a microscopic level. The result is a smooth, polished finish that lacks the aggressive micro-serrations caused by coarser steels. Because the profile is oval rather than round, you benefit from a wider contact surface, which translates to more efficient honing with fewer strokes and better control over the blade's angle. Built for the rigors of the meatpacking and professional culinary industries, the handle is hygienically sealed to the steel. There are no gaps for food particles or bacteria to hide, making it fully compliant with strict industrial sanitation standards. The blue non-slip handle ensures a secure grip even when hands are wet or greasy, providing the stability required for safe, repetitive honing during a 12-hour shift. Made in Germany, this tool represents the pinnacle of Friedrich Dick’s centuries-old expertise in metallurgy and tool manufacturing. Learn More

The F. Dick 12 in. Fine Cut Oval Steel with non-slip handle is very unique. Rather than straight grooves, the patterning resembles a series of "S" shapes. This does and excellent job of removing a burr and smoothing an edge without leaving micro-serrations. Works well for German steels and highly recommended for Japanese as well. Also available in 10 in. length. F. Dick has been the world leader in producing and innovating honing steels since the 1800's if you are looking for a steel that actually straightens your edge and lasts with heavy use then by your steel from Germany. Learn More