You have no items in your shopping cart.
Wood Sayas
A "saya" is a traditional Japanese wooden sheath or scabbard designed to protect a knife blade when it's not in use. They are essential for protecting the delicate edge from chips and damage, especially in a crowded drawer, and for ensuring safety during transport.
Traditionally made from Ho Wood (Japanese magnolia), which is moisture-resistant and won't scratch the blade, sayas offer a blend of beautiful aesthetics and practical function. They provide a snug, secure fit, often held in place with a pin, to preserve the blade's sharpness and prevent accidents.
-
Minonokuni 6.5-inch (165mm) Left-Handed Deba Saya
This ho wood saya is shaped for a left-handed 165mm Minonokuni deba, such as the Take 165mm left-handed deba or the Ume 165mm left-handed deba. A left-handed deba carries its bevel and hollow back on the opposite faces to a right-handed knife, so it needs a saya with the opening carved the other way.It fits most Minonokuni knives of this shape, size and hand, but fit is not guaranteed. Each deba is forged by hand, and spine thickness varies from knife to knife. If the fit is snug, do not force the blade. Lightly sanding the inside of the opening with fine sandpaper will ease it.
Why Use a SayaA deba’s edge is hard and thin, and a drawer full of utensils will chip it. The saya protects the edge in storage and in a knife roll. Ho wood is soft enough that it does not dull the edge as the knife goes in and out.Make sure the blade is clean and completely dry before sheathing it; carbon steel left damp inside a saya will rust. For the right-handed knife at the next size up, see the 180mm deba saya. Learn More -
Minonokuni 7.1-inch (180mm) Left-Handed Deba Saya
Because a left-handed deba has its bevel and hollow back on the opposite faces from a right-handed one, a standard saya will not fit it properly. This ho wood saya is carved the other way, for left-handed 180mm Minonokuni debas such as the Take 180mm left-handed deba and the Ume 180mm left-handed deba.It fits most knives of that shape, size and hand, but fit is not guaranteed. Deba spine thickness varies between hand-forged knives. If the fit is tight, do not force the blade; lightly sanding the inside of the opening with fine sandpaper will give a secure friction fit.
Edge ProtectionThe edge of a single-bevel deba is thin and hard enough to chip on contact with other tools. The saya keeps it covered in a drawer or a knife roll, and the soft ho wood will not dull the edge as the knife goes in and out.Store the knife clean and completely dry; a damp carbon steel blade will rust in the saya. For the 165mm left-handed deba, see the 165mm left-handed deba saya. Learn More -
Minonokuni 8.3-inch (210mm) Yanagi Saya
This ho wood saya is made for right-handed 210mm Minonokuni yanagi, among them the Take 210mm yanagiba, the Ume 210mm yanagiba, the Gin-San 210mm yanagi and the Sakura Damascus 210mm yanagi. It also replaces the saya supplied with the Matsu 210mm yanagiba.It fits most knives of this shape, size and hand, but fit is not guaranteed, since each blade is forged by hand and spine thickness varies. If the knife is snug, do not force it; ease the opening with a light sanding on the inside.
Why a Yanagi Needs OneA yanagi edge is very thin, and the long blade is easy to knock against other tools in a roll or drawer. A saya covers the full length and keeps the edge intact between services. The soft ho wood does not dull the edge.Sheathe the knife only when it is clean and dry. For a longer slicer, see the 240mm yanagi saya. Learn More$20.00 -
Minonokuni 9.4-inch (240mm) Left-Handed Yanagi Saya
A left-handed yanagi has its bevel and hollow back reversed, and this ho wood saya is carved to match. It is made for left-handed 240mm Minonokuni yanagi such as the Take 240mm left-handed yanagi and the Ume 240mm left-handed yanagi, and it replaces the saya supplied with the Matsu 240mm left-handed yanagiba.The saya fits most knives of this shape, size and hand. Because each blade is hand-forged and spines vary, the fit is not guaranteed. A tight fit can be eased by sanding the inside of the opening lightly; do not force the knife.
Protecting a Left-Handed SlicerThe edge of a yanagi is thin and easily chipped in a drawer or knife roll. The saya covers the whole blade, and the soft ho wood will not dull it.Put the knife away clean and fully dry. For a longer left-handed slicer, see the 270mm left-handed yanagi saya; the right-handed version is the 240mm yanagi saya. Learn More -
Minonokuni 10.6-inch (270mm) Left-Handed Yanagi Saya
This ho wood saya is carved for left-handed 270mm Minonokuni yanagi, including the Take 270mm left-handed yanagi and the Ume 270mm left-handed yanagi. The opening is shaped for a blade with its bevel on the left face, which a right-handed saya will not hold properly.It fits most knives of this shape, size and hand, but each blade is forged by hand and spine thickness varies, so fit is not guaranteed. If a knife is tight, sand the inside of the opening lightly instead of forcing the blade.
Why It Matters on a Long SlicerA 270mm yanagi has a long, thin edge that is exposed along its whole length. In a knife roll or on a crowded station, a saya is the simplest way to keep that edge from chipping. Ho wood is soft enough that it will not dull the edge.Sheathe the knife only when clean and dry. For a shorter left-handed slicer, see the 240mm left-handed yanagi saya. Learn More$36.00 -
Minonokuni 11.8-inch (300mm) Yanagi Saya
This ho wood saya is made for right-handed 300mm Minonokuni yanagi, such as the Take 300mm yanagiba and the Ume 300mm yanagiba. It also serves as a spare or replacement for the saya supplied with the Matsu 300mm yanagi.It fits most knives of this shape, size and hand. Spine thickness differs between hand-forged blades, so fit is not guaranteed; a snug saya can be eased with a light sanding on the inside of the opening.
Carrying a Long YanagiA 300mm slicer is hard to store safely without a cover, and its thin edge is the part most at risk. The saya protects it in a knife roll, on a magnetic strip or in a drawer. The soft ho wood does not dull the edge as the knife goes in and out.Put the knife away only after it is washed and fully dry. For a shorter slicer, see the 240mm yanagi saya. Learn More -
Jikko 4.7 in. (120mm) Petty Saya
Jikko 4.7 in. (120mm) Utility Saya or wooden sheath used to store Japanese knives. The shape of this saya fits many brands and is intended for (Double Beveled Japanese Knives). This Unique Ho-Wood sheath is ideal for the storage of high carbon knives as it will aid in the prevention of rust while being sheathed. Learn More$23.50 -
Jikko 5.0 in. (150mm) Utility Saya
Jikko 5.0 in. (150mm) Utility Saya or wooden sheath used to store Japanese knives. The shape of this saya fits many brands and is intended for (Double Beveled Japanese Knives). This Unique Ho-Wood sheath is ideal for the storage of high carbon knives as it will aid in the prevention of rust while being sheathed. Made in Japan. Learn More -
Jikko 210 mm (8.2 in) Gyuto Saya
Jikko Ginsan Ho wood sheath-saya for 210mm (8.2 in) Gyuto Learn More -
Jikko 240mm (9.4 in) Gyuto Saya
Jikko Ginsan Ho wood sheath-saya for 240mm (9.4 in) Gyuto Learn More$37.00
