Blade Guards / Sheaths

The Knife Merchant 3.5 x 1 in. Edge Guard was made to fit a paring knife up to 3.5 inches in length. We recommend putting an edge guard on every knife to protect the blade's edge, the knife bag used to store your kitchen knives, and more importantly, yourself. Learn More

The Knife Merchant 6.5 x 1.25 in. Edge Guard was designed to fit a utility or boning knife up to 6.5 inches in length. We recommended putting an edge guard on every knife to protect your knife luggage, your knife's edge, and your hands from damage. Learn More

The Knife Merchant 8.5 x 1.25 in. Edge Guard was designed to fit a bread knife, carving knife or slicing knife that is up 8.5 inches long. We recommended putting an edge guard each knife to protect your knife bag, your blade, and more importantly, yourself. Learn More

The Knife Merchant 10.5 x 1.25 in. Edge Guard was specifically designed to fit narrow blades that are 8.5 10.5 inches in length, like a carving knife or slicer. An edge guard is put on a knife to protect the blade's edge, the knife bag used to store your kitchen knives, and last but not least, yourself. Learn More

Stop Micro-Abrasions and Edge Dulling in Storage Every time your professional cutlery shifts in a drawer or rolls in a knife bag, the edge is at risk. For serious chefs, the Dexter 4" Felt-Lined Edge Guard isn't just an accessory—it's an insurance policy for your most used tools. While standard plastic guards can cause micro-scratches on polished steel, the Dexter-Russell signature felt-lined interior provides a soft, non-abrasive cradle that maintains the factory-honed edge of your blades. Engineered for Wide-Profile Performance Standard guards often fail to accommodate the girth of professional turners and wide-profile slicers. This 4-inch wide guard is specifically engineered to fit these bulkier tools, ensuring that from the heel to the tip, your edge remains isolated from impact. Whether you are a culinary student assembling your first kit or an executive chef managing a busy station, this guard eliminates the metal-on-metal contact that leads to premature dulling and costly professional sharpening sessions. Built for the Rigors of the Professional Kitchen Constructed from heavy-duty, impact-resistant materials, the KG4 model is designed to withstand the high-heat, high-impact environment of a commercial kitchen. The slip-on design is calibrated for a secure friction fit, meaning it stays in place during transit in your knife luggage but remains easy to remove during the heat of service. By preventing nicks and dings, you don't just protect the knife; you ensure the safety of your hands when reaching into storage areas. Learn More

Keep your favorite narrow knives sharp, safe, and ready for action with the Dexter 6 1/8 in. Narrow Felt-Lined Edge Guard from Dexter-Russell. Engineered for slim blades, this guard provides a tailored fit that shields edges from nicks, bumps, and wear without adding bulk. The interior felt lining acts like a soft cradle, gently cushioning each blade to maintain its sharpness and integrity. Its slim, lightweight profile allows effortless storage in drawers, knife rolls, or chef bags, making it ideal for culinary professionals on the move or organized home kitchens. Learn More

Mechanical Blade Security for Professional Slicers When sliding a precision-ground slicer into a standard plastic guard, the friction alone can create micro-scratches on the blade face. This Dexter-Russell 8.75-inch narrow edge guard solves this via a dual-material architecture. The exterior is a rigid, impact-resistant plastic that prevents the blade from piercing the sheath during transport in a crowded knife roll. Internally, the soft felt lining creates a low-friction environment. In hands-on testing, the blade seats with a firm, tactile 'thud' rather than a plastic click, indicating a snug fit that prevents the knife from shifting. The 1.25-inch width is a critical specification. Unlike universal guards that allow narrow slicers to rattle or slide out, this narrow-profile geometry maintains constant contact with the spine and edge. This prevents the 'edge-walk' common in wider guards, which often results in the tip of the knife impacting the end of the guard. For chefs moving between high-volume stations, this guard ensures that a 20-degree or 15-degree factory edge remains shaving-sharp without the need for touch-up honing upon arrival. The gray exterior is textured for a secure grip even when handling with damp hands in a fast-paced kitchen environment. Learn More

Designed specifically for thinner knives, the Dexter 10-3/8 in. Narrow Felt-Lined Edge Guard delivers dependable protection without added bulk. Its streamlined shape hugs narrow blades securely, helping prevent accidental cuts while protecting the knife’s edge from chips, scratches, and everyday wear. The rigid outer shell provides structure and durability, while the soft felt interior gently cushions the blade to preserve sharpness and finish. Whether stored in a drawer or packed in a knife roll, this guard helps extend the life of your cutlery and keeps your tools safely contained. Learn More

Professional Grade Protection for Your Most Precise Edges Preserve the razor-sharp integrity of your long, narrow knives with a heavy-duty guard designed for the rigors of commercial kitchens and travel. In a professional kitchen, a knife’s edge is its most valuable asset. The Dexter-Russell 12-3/8 in. Narrow Felt-Lined Edge Guard (SKU: 83104) is engineered to solve the most common problem with standard plastic guards: micro-abrasions. Traditional plastic-only guards can actually scratch the polished surface of high-carbon steel or roll a delicate edge during insertion. Dexter-Russell’s solution is a premium felt-lining that creates a soft, friction-free environment for your blade. This guard is specifically tailored for the unique geometry of narrow blades. Whether you are protecting a long fillet knife, a stiff boning knife, or a narrow slicer like a Sujihiki, this guard ensures a snug, secure fit. The durable outer shell provides a rigid barrier against impact, preventing your knife from piercing through your knife roll or bag, while the interior 'cradles' the edge to maintain out-of-the-box sharpness for longer periods between stones. Built for professionals who demand longevity from their tools, this edge guard is an essential investment for any chef who transports their kit or stores specialty blades in shared drawer spaces. It doesn't just cover your knife; it preserves the precision geometry you rely on for clean, effortless cuts. Learn More