F. Dick Honing Steels

For the last two hundred years, F. Dick steels have been widely recognized as the best made at world fairs and other competitions. Professional butchers likely have the best understanding of steels, or honing rods. Their work demands they start with a very sharp edge and they hone their knives every ten to fifteen minutes while working. Nearly all butchers use a polished or fine cut steel because they remove a minimum amount of metal from the edge of the knife. They will only realign the existing edge, which is what a steel is designed to do.

Our recommendation is to work with a very fine stone to rebuild your edge and a fine-cut F. Dick steel to keep it straight. When you are working as a carver / butcher, honing your knife four to six times an hour, for a full shift, you will probably want to use a Friedrich Dick polished steel in order to avoid wearing the edge down. Most cooks hone the knife before starting work or after taking it to the sharpening stone. For them, the F. Dick regular cut steel works well. If you keep the knife edge aligned, you won’t have to grind a new edge as often and the knife lasts longer.

1 Item(s)

per page

  • F. Dick Dickoron Multiron 12-inch Oval Steel

    The Multiron combines a fine cut and a regular cut in one oval rod. Under light pressure it hones smoothly, and with more pressure slight indentations along the rod increase the abrasion to straighten damaged or burred edges.We like this steel at Knife Merchant because you can feel any problem areas on the knife as it passes. A bad spot on the edge announces itself by touch, so the cook knows where to work, and regular use on this rod lets a knife go longer between sharpenings. The cuts are fine and even for a consistent result along the 12-inch length.For a flat rod with fine and regular cuts, the F. Dick MultiCut 11-inch flat steel takes a similar approach. A single fine cut is the EuroCut 12-inch oval fine cut steel, and a finer Dickoron finish is the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More

1 Item(s)

per page