You have no items in your shopping cart.
F. Dick Knife Rolls, Bags & Blocks
Made with durable materials, these practical and efficient storage solutions ensure that your valuable knives are kept safe and secure while on the go or in the kitchen. Keep your tools organized and well-protected with Friedrich Dick rolls, bags, and blocks.
-
F. Dick 10-inch Narrow Blade Guard
Long, slim blades need a long, slim guard, and this 10-inch narrow F. Dick guard fits 8- to 10-inch fillet knives, narrow trimming knives and slicers. Examples are the ErgoGrip 8.25-inch narrow trimming knife and the 7-inch semi-flexible fillet knife.A flexible fillet blade is easy to bend or nick when it is carried uncovered in a tackle box or a knife bag. The narrow sleeve holds the blade straight and protects its edge, and it keeps the point from catching on anything else in the bag.For fishing trips, a guarded fillet knife can ride in a tackle box tray with hooks and pliers and come out with its edge intact. In a kitchen, the same guard keeps a slicer from getting nicked in a crowded drawer, so it stays ready for the next carving job.Wider knives of the same length, such as 10-inch butcher and breaking knives, fit the 10-inch wide guard instead. For blades up to 6 inches, the 6.5-inch narrow guard fits more closely. Store guarded knives flat rather than point down. Learn More -
F. Dick 10-inch Wide Blade Guard
Nine- and 10-inch butcher, breaking and chef’s knives fit this 10-inch wide F. Dick guard. Two that fit are the ErgoGrip 10-inch butcher knife and the 10-inch breaking knife.Long knives are the hardest to carry safely. Covering the whole edge lets a butcher pack a 10-inch knife into a toolbox or bag next to other tools without either one getting damaged. The wide sleeve covers tall blades, including butcher knives with a broad heel.For a meat processor who travels to farms, the guard also keeps long knives safe in a truck toolbox, where they would otherwise slide against steel tools. It works just as well in a kitchen drawer, where a long blade is the most likely to catch a reaching hand. A covered edge also stays sharp longer between honing sessions, which saves time at the steel and at the stones.Clean and dry the knife first, then slide the guard on from the edge side until the tip is covered. For 12-inch knives and scimitars, step up to the 12-inch wide guard. Knives around 8 inches fit the 8.5-inch wide guard more closely. Learn More -
F. Dick 12-inch Wide Blade Guard
The largest guard in the F. Dick range, this 12-inch wide sleeve fits 12-inch butcher knives, bull nose knives and scimitars, such as the ErgoGrip 12-inch butcher knife and the 12-inch ErgoGrip scimitar.A 12-inch blade carried loose is a hazard to the person carrying it and to anyone who opens the bag. This guard covers the full length and height of a large butcher blade and holds it closed during transport between a shop, a processing room and home.In a shop, guarded long knives can be stacked in a drawer without the edges touching, which protects both the steel and the hands that sort through them. On the road, the guard keeps a 12-inch blade safe in a truck or a toolbox. A protected edge also needs less work at the steel before the next job, so the knife is ready sooner. For a butcher who brings knives to farms, that matters on every trip.Scimitars have a sharply upswept tip; check that it sits fully inside before carrying. The F. Dick Scimitar Knife Sheath is a fitted alternative for scimitars. For 10-inch knives, the 10-inch wide guard fits more snugly. Learn More -
F. Dick 4-inch Narrow Blade Guard
Paring knives, small boning knives and short fillet blades fit this 4-inch narrow F. Dick guard. It is the size for the ErgoGrip 4-inch boning knife and the 4-inch small fillet knife, and for a paring knife carried in a knife roll.Small knives are the ones that get tossed loose into a drawer or bag, where the tip bends and the edge chips on other tools. A plastic sleeve slid over the blade stops that and saves a finger when someone reaches in. The guard slips on from the edge side and holds by friction.A small guard also fits easily into an apron pocket or a tackle box, so a paring or fillet knife can travel without its own case.Choose a guard at least as long as the blade, so the tip stays covered. Slide it on only once the knife is clean and dry. For 5- and 6-inch boning knives, the 6.5-inch narrow guard is the next size up. Learn More -
F. Dick 6.5-inch Narrow Blade Guard
Five- and 6-inch boning knives slide into this 6.5-inch narrow guard, including the ErgoGrip 5-inch curved stiff boning knife and the 6-inch curved flexible boning knife. It suits trimming and sticking knives of the same length as well.Boning knives are thin, and a thin edge rolls quickly if it rattles against other steel. A narrow guard fits closely around a slim blade so it does not slide off in a bag, and it keeps the knife safe to handle between shifts or on the way home from deer camp.The narrow profile also takes up little room in a roll, so several guarded boning knives can travel side by side without crowding.A guard should cover the full blade with a little to spare at the tip. Let the knife dry before guarding it, since trapped water marks the steel. Shorter knives fit the 4-inch narrow guard, and longer slim blades fit the 10-inch narrow guard. Learn More -
F. Dick 8.5-inch Wide Blade Guard
An 8-inch chef’s knife or butcher knife fits this 8.5-inch wide guard, which covers taller blades than the narrow guards can. It suits the ErgoGrip 8.25-inch butcher knife and the 8.25-inch breaking knife.An 8-inch knife is a standard part of a cook’s kit, and a wide sleeve lets it go into a roll or a drawer without the edge touching anything. The guard slides on from the edge side, covering the blade from heel to tip, and keeps the hand that reaches in safe as well.The guard is light and adds no bulk to a knife roll, and it lets a chef keep a personal knife in a shared drawer at work without worrying about the edge. It also protects an edge that took time to sharpen.Measure the blade at its tallest point before ordering; this guard is 2 inches wide. For 9- and 10-inch blades, the 10-inch wide guard is the next size. Slim blades of the same length fit more securely in the 10-inch narrow guard. Learn More -
F. Dick Knife Scabbard with Belt
The F. Dick Knife Scabbard with Belt holds up to 4 knives, and comes with a separate strap for your honing steel. This scabbard is perfect for small boning and butchery tools, but will not fit wider knives. Ideal for use in industrial settings like processing planes, slaughterhouses, smokehouses, grocery stores even on commercial fishing vessels. Made in Germany made to last. Learn More$37.40 -
F. Dick 6-Slot Wood Knife Block
Six slots hold the core knives of a home kitchen, and this F. Dick wood block keeps them protected and close at hand on the counter. It is sold as the block only, so it can be filled with the knives you already own.A block stores each blade separately, which keeps edges from rubbing against other utensils in a drawer. Six slots suit a paring knife, a utility knife, a chef’s knife, a bread knife, a slicer and a steel. Wood gives the block a warm look beside the stove.Insert each knife with the edge facing up so it does not drag along the bottom of the slot. A block on the counter also reminds a cook to put knives away clean and dry after use.For more slots, including one for shears, see the F. Dick 9-slot knife block. A magnetic option is the F. Dick designer magnetic knife block, and the 1905 6-piece magnetic knife block set comes with knives. Learn More$175.50 -
F. Dick Single Knife Scabbard
Fitting knives with blades up to 9 inches, this 13-inch plastic scabbard holds one knife on the belt for butchers, meat processors and chefs who move around while they work. The integrated buckle attaches to a standard belt.A scabbard keeps the knife within reach and keeps the edge covered between cuts, so it is not left on the table where it can be knocked to the floor or picked up by the blade. Plastic is lightweight and easy to wash at the end of a shift. It holds a boning or sticking knife of up to 9 inches, such as the ErgoGrip sticking knife or the 6-inch curved stiff boning knife.For carrying several knives and a steel together, the F. Dick Knife Scabbard with Belt has more room. Blades longer than 9 inches, such as 12-inch butcher knives, store better in a 12-inch wide blade guard. Learn More$12.50 -
F. Dick 4Knives Magnetic Knife Block, Black
A magnetic block holds each knife by the flat of its blade, so the edge touches nothing on the way in or out, and the block takes any knife that fits rather than a fixed set of slots. The F. Dick 4Knives block does this in black acrylic glass, with a magnetic rail inside that holds up to four knives securely and in order.Four knives make a working kit for a small kitchen: a chef’s knife, a santoku or utility knife, a bread knife and a parer. The knives stay visible through the acrylic, which makes the right one easy to pick, and the block stands on the counter in a small footprint.F. Dick designed the block to come apart, so it can be cleaned thoroughly, which slotted wooden blocks cannot be. It is sold without knives.
Choosing a blockThe same block comes in white: see the F. Dick 4Knives Magnetic Knife Block, White. For a heavier stainless steel block, see the F. Dick Designer Magnetic Knife Block. Learn More$160.00
